Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Roof Repair in Royal Palm Beach: What to Know First
Independent CWS roof repair in Royal Palm Beach typically runs $350-$1,200 depending on the failure, and most jobs are completed in a single visit with parts in hand before we arrive. We’re not a CWS dealer and we don’t pretend to be. What we are is a local shop that has pulled failed CWS flashing, replaced torn CWS weather seals, and corrected CWS drain-plane mistakes in enough Royal Palm Beach homes to know exactly what goes wrong and what it takes to fix it right. If you own a CWS window, skylight, or roof-glazing system and you’re seeing water where it doesn’t belong, call (386) 251-6745 for a straight answer and a free estimate.
How CWS Products Fail - and How We Fix Them
- CWS 400 Series sashes lose their seal at the top rail after storm-driven rain. The gasket CWS used at the head of the sash compresses over time, and in Royal Palm Beach’s wet-season downpours water gets drawn in by wind pressure. We replace the gasket with a matched-durometer aftermarket seal and realign the sash so it closes against the weatherstrip evenly, not just at the latch side.
- CWS skylight curb flashing pulls away at the corners. This is the failure we see most on CWS roof installations in Royal Palm Beach. The corner sections are lapped and sealed, not soldered, and after ten or twelve summers of thermal movement the sealant cracks and the laps open. We remove the old flashing, re-lap the corners with proper overlap, and seal them with a polyurethane that flexes without shearing.
- CWS roof-glazing channels hold water instead of draining it. The weep design on some CWS fixed-glass roof panels depends on a clear channel from the glass pocket to the exterior. When debris or dried sealant blocks that channel, water backs up and finds the interior. We clear the weeps and re-slope the channel where needed, then test with a controlled water spray before we call the job done.
- CWS flashing tape joints fail at the eave transition. We regularly find tape that was never rolled properly at the factory joint, and years of South Florida humidity finish the job. The tape lifts, water tracks underneath, and the roof deck starts to stain. We pull the lifted tape, inspect the deck, and re-flash with a self-adhering membrane that stays put in heat and humidity.
- CWS roof-panel gaskets degrade from UV exposure. On west-facing roof installations in Royal Palm Beach, the afternoon sun cooks the exposed gasket edges. They shrink, crack, and pull back from the frame, opening a direct path for rain. We replace the gaskets with UV-stabilized material rated for South Florida exposure, and we set the panels so the new seals sit under compression, not just contact.
Our CWS Roof Repair Process
- 1
The call. You talk to a person, not a menu. We ask what you’re seeing, where the water shows up, and when it started. That tells us whether we’re chasing a flashing failure, a gasket failure, or a drain-plane problem before we ever set foot on the roof.
- 2
The inspection. We look at the CWS installation the way an installer would, not the way a salesman would. We check the laps, the weeps, the sealant lines, and the deck condition underneath. We take photos and show you what we found.
- 3
The parts decision. CWS parts are sometimes available through distributors, sometimes not. Where OEM parts make sense and are obtainable, we use them. Where a quality aftermarket part outperforms what CWS shipped originally, we tell you why and we price it honestly. No mystery markups.
- 4
The repair. We do the work with the right flashing, the right sealants, and the right fasteners for South Florida wind loads. No silicone smeared over a failing joint and called a fix.
- 5
The water test. Before we come off the roof, we run water over the repaired area the way a Royal Palm Beach thunderstorm would deliver it. If it leaks, we’re not done.
- 6
The paperwork. You get the Done Right Promise in writing and a clear explanation of what was done and why. We stand behind it.
What CWS Roof Repair Costs in Royal Palm Beach
Here’s what we bill for common CWS roof repairs in Royal Palm Beach, based on jobs we’ve done in the area:
- CWS skylight re-flash (single unit): $450-$850
- CWS fixed roof panel re-gasket and re-seat: $350-$700
- CWS roof-glazing weep channel clear and re-slope: $250-$500
- CWS flashing tape repair at eave transition: $300-$600
- CWS sash top-rail gasket replacement (per window): $150-$300
What moves the price is access, roof pitch, the number of units involved, and whether the deck underneath needs repair before we can re-flash. We give you a written line-item quote before work begins, and the number on that quote is the number on the bill. Call (386) 251-6745 to schedule a free estimate.
Why Royal Palm Beach Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been serving Royal Palm Beach since 2008 through the company Dale Kessler founded in 2008, and we’ve built our name on roofs and window openings the other guys hurried past. Our techs know CWS failure patterns because they’ve corrected them on homes from Crestwood to the Commons. We also service PGT, CGI, ES Windows, and ECO Window Systems, so when a CWS roof repair turns into a conversation about replacing a unit with something better suited to South Florida, we can quote manufacturer lines side by side on paper and show you exactly what you’re buying. Every CWS repair carries our Done Right Promise. If it’s not done right, we make it right. No arguing, no fine print. And a live person answers our phone 24 hours a day, 7 days a week. If it is not sealed right, the next storm will tell you.
FAQs
No, not on its own. An independent repair by a licensed contractor does not automatically void a manufacturer warranty, and we work warranty-safe on every CWS job. What voids warranties is ignoring a failure until water damage spreads or using parts and sealants that CWS never approved. We use compatible materials and document everything so your warranty position stays intact.
CWS parts are spotty. Some gaskets, weatherstrips, and hardware are available through Florida distributors, but flashing kits and certain panel components are frequently out of circulation or discontinued. When OEM parts are available, we use them. When they’re not, we source quality aftermarket equivalents that meet or exceed the original spec. Call (386) 251-6745 and we’ll tell you honestly what’s obtainable before you spend a dollar.
It depends on the panel’s age, the condition of the frame, and the extent of the water intrusion. If the glass is sound and the frame is solid, a re-gasket and re-flash usually gives you years more service for a fraction of replacement cost. If the frame is corroded or the deck is compromised, replacement becomes the honest answer. We’ll show you the condition and give you both prices.
Most CWS roof repairs in Royal Palm Beach are completed in one visit. We carry the common sealants, gaskets, and flashing materials on the truck, and we schedule the work when the weather allows a proper water test. A live person answers our phone 24/7, so you’ll never chase a callback to get on the schedule.
No. The quote we give you before the job is the price you pay when it’s done. If we find hidden deck damage or a second failure while we’re on the roof, we stop and give you a written add-on price before we touch it. No surprise line items on the bill, ever.
If your CWS roof system is leaking or showing signs of seal failure, call (386) 251-6745 for a free estimate. We’ll inspect it, give you a written quote, and fix it right the first time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.