Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Custom & Geometric Windows in Royal Palm Beach: What to Know First
ECO Window Systems custom and geometric windows in Royal Palm Beach can be repaired or replaced by an independent service provider in most cases within five to ten business days, depending on glass fabrication and frame work. We’re TruePane Windows & Doors, and we handle arched, radius, trapezoid, triangle, and oversized ECO Window Systems units throughout Royal Palm Beach. Typical repair work runs $285 to $1,200; full replacement of a geometric unit starts around $900 and climbs with size and glass package. If you own an ECO Window Systems window that’s fogged, binding, or leaking, call (386) 251-6745 and we’ll give you a straight answer on what it’ll take.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds aluminum and vinyl frames common in South Florida track homes and custom builds alike. The geometric shapes are where we see the most trouble, because corners and radii concentrate stress that a standard rectangle never feels. Here’s what we find in Royal Palm Beach specifically:
- Radius corner seal failure on arched units. ECO’s radius and half-round windows use a bent frame profile that, over years of afternoon sun on west-facing Royal Palm Beach walls, develops micro-cracks at the curve apex. Moisture gets in, the argon escapes, and the glass fogs. We de-glaze, replace the IGU, and re-seal with a marine-grade structural silicone that handles the same heat cycle.
- Binding sashes on trapezoid and triangle windows. Geometric ECO frames flex slightly in the summer humidity, especially on stucco homes where the opening wasn’t perfectly square to begin with. We’ve measured corner-to-corner gaps off by up to 1/4 inch on original installs. The fix is shimming the frame true and resetting the sash hardware, not just lubricating the track and hoping.
- Oversized fixed-panel bowing. ECO’s larger picture and geometric fixed units, anything over 48 inches on a side, can bow under wind load if the original installer under-shimmed the frame. We get calls after the first summer storm where the homeowner notices the glass flexing. We pull the stops, add structural shims at the load points, and re-set the panel so it’s rigid.
- Weep hole clogging on radius base units. The curved bottom channel on ECO radius windows drains through small weep slots that Royal Palm Beach pollen and fine construction dust clog fast. Water sits, the frame anodizing pits, and eventually you get a leak at the interior sill. We clear the weeps, flush the channel, and show you how to check them seasonally.
- Manufacturing tolerance drift on multi-panel geometric assemblies. When two or three ECO shaped units are mulled together, the factory tolerances on the couplers don’t always line up after a few years of settling. The joint opens, air infiltrates, and the corner feels soft. We re-mull with a thicker structural coupler and re-flash the exterior joint.
Our ECO Window Systems Custom & Geometric Windows Process
Every ECO Window Systems job we run in Royal Palm Beach follows the same sequence, because Dale Kessler has seen what happens when a company skips a step and calls it done:
- 1
The phone call. You reach a live person, any hour. We ask what shape the window is, what it’s doing, and whether it faces east or west. That last part tells us a lot about sun fatigue.
- 2
The site measurement. A background-checked, uniformed technician arrives and measures every opening twice. For geometric windows, we measure across three axes, not two. A radius isn’t a rectangle with hope attached.
- 3
The parts decision. If the frame’s sound, we source a replacement IGU matched to the original glass package. ECO original parts are fine when available; when lead times stretch past three weeks, we’ll quote an aftermarket IGU from our local fabricator with the same Low-E and argon spec, stated on the written quote.
- 4
The work itself. We de-glaze, clean the channel, set the new glass or full unit, shim it true, and re-seal. On exterior-facing geometric frames we re-flash the perimeter so water never finds the sheathing.
- 5
The test and the paperwork. We run a water test, check the drain path, and register both warranty layers in writing before the truck leaves the driveway. If the pane is not true, the job is not done.
- 6
The follow-through. Your job is covered by the Done Right Promise. If something’s off, we come back and make it right. No paperwork fights.
What ECO Window Systems Custom & Geometric Windows Costs in Royal Palm Beach
Here’s what we quote most often for ECO Window Systems work in Royal Palm Beach. These are line-item ranges, not vague “depends” answers:
New ECO Window Systems Window Cost Ranges
| Project Type | Typical Cost Range |
|---|---|
| Arched or half-round ECO unit, standard glass | $900 - $1,800 |
| Trapezoid or triangle ECO window | $1,100 - $2,400 |
| Oversized geometric fixed panel, 50+ inches | $1,800 - $4,200 |
| Multi-panel geometric mulled assembly | $3,500 - $8,000 |
ECO Window Systems Repair in Royal Palm Beach
| Repair Type | Typical Cost Range |
|---|---|
| IGU replacement on radius or trapezoid unit | $285 - $850 |
| Frame re-shimming and sash reset on binding geometric window | $180 - $420 |
| Full re-glaze and re-seal on arched unit | $400 - $1,000 |
| Multi-panel re-mull with structural coupler | $650 - $1,500 |
What moves the price on custom and geometric work is the glass package, the frame material, and whether the unit is reachable from a ladder or a lift. Impact-rated geometric glass carries a real premium, and it should. These are the prices we quote on paper before any work begins, and the number on the quote is the number on the bill. For an exact number on your ECO Window Systems window, call (386) 251-6745 and ask for a free estimate. We’ll come measure it, not guess at it.
Why Royal Palm Beach Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We’re an independent ECO Window Systems service provider, not a franchise and not a call center. TruePane Windows & Doors has served Royal Palm Beach and the surrounding area since 2008, and Dale Kessler grew up off Crestwood Boulevard. That matters when a shaped window fails on a home ten minutes from where he takes his kids to Commons Park. Here’s the square deal: every job carries the Done Right Promise, both manufacturer warranty layers get registered in writing with durations stated before we leave, and we’ll be there when we say. We also service PGT, CGI, CWS, and ES Windows, which means we’re not trying to sell you a whole new window line when a geometric unit just needs the right repair. The work stands behind one rule we’ve never had to renegotiate: if the pane is not true, the job is not done.
FAQs
Yes, and that’s usually the right call. Most arched and radius ECO units in Royal Palm Beach fail at the IGU seal, not the frame. We de-glaze the unit, order a matched IGU, and re-set it in the existing frame. Call (386) 251-6745 and we’ll tell you after measuring whether yours is a glass-only fix or a full swap.
We’re an independent service provider, so we don’t administer ECO’s manufacturer warranty. What we do is make sure your work is warrantied by us in writing, and we never void a manufacturer warranty by using parts that don’t match the original spec. If the OEM warranty still applies, we’ll tell you how to file it correctly.
A properly specified aftermarket IGU with the same Low-E coating, argon fill, and spacer type will perform as well as the OEM unit in a geometric frame. The critical variable is the measurement and the seal. A radius IGU that’s off by an eighth of an inch won’t seat right, which is why we measure across three axes before we order anything.
Typical turnaround for a custom or geometric ECO Window Systems unit is five to ten business days, depending on whether the IGU has to be fabricated to a non-standard radius. Straight glass replacement is usually faster. We’ll give you a firm window of days on the written quote, and we’ll be there when we say.
No. The price on our written quote is the price you pay. The only exception is if we open up the frame and find rot or structural damage we couldn’t see from the outside, and in that case we stop and show you before we do anything. That’s the deal, in writing, every time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.