Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Door Installation: The Royal Palm Beach Owner’s Guide
We install, replace, and service Mr-Glass door units throughout Royal Palm Beach, with most complete door installations running between $1,400 and $3,800 depending on the slab size, frame condition, and glass package. We carry Mr-Glass-compatible hardware, rollers, tracks, and weatherseal components on our trucks, and we can usually complete a standard door installation or replacement in a single visit. Most Royal Palm Beach homeowners call us after noticing a door that scrapes the frame when it opens, a handle that no longer latches cleanly, or glass that shows condensation between the panes. The failed part is rarely the whole door, but a door that fights you every morning tends to be a door that has been fighting the humidity and salt air for years.
If you have a Mr-Glass door that is not sliding, locking, or sealing the way it should, this page will tell you what to check, what it likely costs, and when it makes sense to call (386) 251-6745 instead of wrestling with it yourself.
Which Mr-Glass Models This Applies To
Mr-Glass has manufactured sliding patio doors, French door systems, and entry door units for the Florida market for years, and we work on the full range. The most common units we see in Royal Palm Beach are the aluminum sliding patio doors from the 1990s and early 2000s, along with newer vinyl-framed sliders and French door configurations. The compatibility issue that catches people off guard is the roller assembly: Mr-Glass used at least three different roller housing sizes across their production runs, and a roller that looks correct on the shelf can sit 1/8-inch too high or too low in the track. That gap is the difference between a door that glides and a door that binds.
To identify your Mr-Glass model, look for a manufacturer label on the door edge or the top rail. The label typically includes the series name and a production date code, which helps us match the correct OEM part. If the label has worn off, we measure the roller housing, the glass thickness, and the frame profile on site. We recommend OEM Mr-Glass components where structural alignment matters, but we will also tell you honestly when a quality aftermarket roller or weatherseal performs just as well for less money. We do not push parts you do not need.
TruePane Windows & Doors is an independent installer and service provider. We are not affiliated with Mr-Glass, but we have been matching their hardware and replacing their door systems in Palm Beach County long enough to know where the weak points are.
Signs Your Mr-Glass Door Installation Is Failing
- The door scrapes or shudders when you slide it. This usually means the roller wheels have flat-spotted or the roller housing has corroded. Once the roller seizes, the door begins dragging the track, and every slide grinds metal against metal.
- The door drops when you lift the handle. That downward sag is a worn or broken roller assembly. Mr-Glass doors from the older production runs used steel roller pins that eventually pit in coastal humidity, even in a well-maintained home.
- Condensation or fogging between the glass panes. A broken seal lets humid Florida air into the insulated glass unit. Once the desiccant inside the spacer is saturated, the fog never clears, and the insulating value of the glass is gone. We have seen this on west-facing Royal Palm Beach doors within 8 to 12 years of installation.
- The lock no longer aligns with the strike plate. When rollers wear unevenly or the frame shifts, the latch bolt drops out of alignment. Forcing the lock eventually bends the bolt or strips the keeper, and the next storm reveals how little you actually had locking that door.
- Water staining at the bottom corners of the interior frame. Worn weatherseal or a failed door sweep lets wind-driven rain wick up into the frame. In Royal Palm Beach’s summer downpours, this shows up fast and rots the frame from the inside if ignored.
Replacement Cost & What’s Included
For a Mr-Glass door installation in Royal Palm Beach, here is what we typically quote, installed:
- Roller and track replacement (sliding door): $180 to $420 per door, depending on whether we replace both rollers or the full track assembly.
- Weatherseal and door sweep replacement: $90 to $220, including the materials and cleanup.
- Complete sliding glass door installation (Mr-Glass-compatible unit): $1,400 to $2,800, depending on glass package, frame material, and whether the existing frame is reusable.
- French door installation (Mr-Glass-compatible): $2,200 to $3,800, including sill work and hardware alignment.
Every quote includes parts, labor, and a written line-item breakdown before we touch the door. There are no change orders, no surprise line items on the bill, and no second appointment left hanging. Both manufacturer warranty layers are registered in writing before our truck leaves your driveway, and our workmanship is covered by the Done Right Promise. That means if something is not right, we make it right, no paperwork fights and no arguing.
DIY or Call Us?
There are things an owner can safely check: whether the rollers are visibly caked with dirt, whether the track is obstructed, whether the weatherseal has pulled loose. Cleaning the track and keeping the frame square are fine weekend tasks. But once you are lifting an 80 to 120 pound door out of its frame to reach a roller, you are working with weight that shifts fast and glass that breaks unpredictably. Dale Kessler grew up off Crestwood Boulevard in Royal Palm Beach and has spent the better part of three decades setting and sealing doors across Palm Beach County. He has seen the same mistake made by homeowners and contractors alike: someone pries a sagging door out alone, loses their grip, and turns a $300 roller replacement into a full frame and glass rebuild.
His rule is simple: if it is not sealed right, the next storm will tell you. When the door is heavy, the glass is old, or the frame has shifted, call (386) 251-6745 and let a trained technician do the lifting.
FAQs
A properly installed Mr-Glass door with quality rollers and fresh weatherseal typically lasts 15 to 20 years in Royal Palm Beach before the frame or glass package needs major work, though coastal exposure and west-facing sun can shorten that to 10 or 12 years for the seal and hardware components. We register both warranty layers in writing so you know exactly what is covered and for how long. Call (386) 251-6745 if you need an honest assessment of your current door.
Rollers, weatherseal, handles, and track sections are routinely replaceable without pulling the entire door, and we will always quote the repair first if the frame and glass are still sound. A broken insulated glass unit usually cannot be field-repaired and needs replacement. Call (386) 251-6745 and we will tell you which applies to your door before you spend a dollar.
A roller or weatherseal replacement usually takes under two hours, and a complete sliding door installation is typically completed the same day, with disposals handled before we leave. French door work with sill replacement may run into a second morning depending on the opening condition. Call (386) 251-6745 for a free estimate and a straight answer on timing.
Yes, we carry Mr-Glass-compatible rollers, track assemblies, weatherseal, sweeps, and handle sets on our service trucks, along with components for PGT, CGI, and CWS doors, so most repairs happen on the first visit. If your door needs a specific OEM component we do not carry that day, we order it and return as soon as it is in, with no second-visit charge. Call (386) 251-6745 and tell us what your door is doing; we will let you know what we likely have on hand.
Get an Honest Quote in Royal Palm Beach
If you are dealing with a Mr-Glass door that binds, fogs, leaks, or will not lock, call TruePane Windows & Doors at (386) 251-6745 for a free estimate. Dale Kessler and the team have served Royal Palm Beach and Palm Beach County since 2008 through a heritage of craft and community commitment, and we would rather quote you a square deal than sell you a door you do not need. A live person answers the phone 24 hours a day, 7 days a week.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.