Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterGarden Windows in Royal Palm Beach, FL | TruePane Windows & Doors
A garden window is the one window profile that earns its keep in a Florida kitchen. It projects outward from the wall, wraps glass around three sides, and gives you a built-in shelf that turns dead wall space into a bright display ledge for herbs, orchids, or cookbooks. At TruePane Windows & Doors, we sell and install impact-rated garden windows across Royal Palm Beach using the same PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines we trust for every hurricane opening we service. The difference is in the install: a projecting window concentrates wind load at the wall junction, and we set these level, plumb, and square per AAMA 2400/2410 practice. Call (386) 251-6745 to talk sizes, glass, and lead times.
Product Overview - Garden Windows
A garden window is a projecting box-style impact window with glass on three sides and a shelf base. That geometry is what makes it useful: the side panes pull in morning and afternoon light, and the shelf creates display space that a flat window simply can’t offer. In Royal Palm Beach, where kitchens tend to face east or west and afternoon sun is relentless, the right glass package matters as much as the frame. Every configuration we order for Royal Palm Beach homes carries laminated impact glass on every pane, including the sloped or flat top lite. The PVB interlayer inside each pane is what holds shattered glass in the frame if a branch or storm debris hits it. That’s not a decorative feature. It’s the core of the product.
Frame materials are aluminum or vinyl. Aluminum gives you the slimmest sightlines and the most glass area, which is why it reads well on contemporary Florida homes. Vinyl offers a softer profile and excellent thermal separation for air-conditioned kitchens. Both materials are engineered around the same structural requirement: a projecting box with four or five glass surfaces must stay rigid under positive and negative wind pressure. The shelf sill is load-rated as part of the assembly, so you can set cookbooks, potted plants, or a small herb garden on it without deflecting the frame. TruePane Windows & Doors installs this product across our full hurricane-impact window line, and we specify every lite, finish, and design pressure to the wind zone of the specific Royal Palm Beach address.
Technical Specifications
- Frame materials: aluminum or extruded vinyl, selected for the opening size and exposure
- Glass options: laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
- Finish options: white, almond, bronze, black, tan
- Sill: shelf sill with integrated display ledge
- Design pressure: matched to your wind zone, up to +/-100, never higher
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to Florida Building Code High-Velocity Hurricane Zone requirements
We size each garden window to the rough opening and the wind zone of your Royal Palm Beach home. There is no single universal size, and we do not oversell design pressure beyond what your zone actually requires. Up to +/-100 means exactly that: we engineer to your site conditions, not to a marketing number.
Hurricane & Compliance Performance
Laminated Impact Glass
Every pane in this window, including the side and top lites, uses laminated glass with a PVB interlayer. Under impact, the glass fractures but stays bonded to the interlayer, which keeps the envelope of the Royal Palm Beach home sealed against wind and water intrusion.
Miami-Dade NOA / Florida Product Approval
Approval numbers are issued per configuration and provided with your specific quote. These documents are what your building department in Royal Palm Beach will ask for at permit time, and we include them in the submittal package.
FBC / HVHZ Compliance
The window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the governing standard for Royal Palm Beach and the rest of Palm Beach County, where coastal wind loads exceed what inland Florida products are built to handle.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. This is the testing context the product is evaluated under, not a claim about a single wind-speed number.
Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, and never higher. Specifying more pressure than the site requires adds cost without adding protection. We calculate the right figure for your elevation, exposure, and opening size in Royal Palm Beach.
Energy Performance
Low-E and insulated glass options are available for west-facing kitchens that catch the full force of the Florida afternoon. Tinted glass is another option we regularly specify for Royal Palm Beach homes where glare on the shelf display is a daily annoyance.
Color & Glass Options
The five finish options cover most of the architecture we see in Royal Palm Beach. White and almond read clean and bright against the stucco walls common in the newer subdivisions. Bronze and black give you a defined frame line that suits Mediterranean exteriors with barrel tile and darker trim. Tan works well on homes where the exterior paint leans warm or sandy, which describes a lot of the older ranch construction in the area.
Glass selection depends on what the window faces. Clear laminated impact glass maximizes the display shelf’s visibility and is the right call for north-facing kitchens. Low-E insulated glass pairs impact protection with an additional barrier for heat gain, which matters on east and west walls in Royal Palm Beach. Tinted glass cuts glare without darkening the room, and we often recommend it when the garden window sits above a sink that catches reflected light off a pool or patio. Our team will walk you through the tradeoffs in a five-minute conversation, then put the final configuration on your written quote.
Installation by TruePane Windows & Doors in Royal Palm Beach
A garden window is more demanding to install than a flush window because the entire assembly cantilevers off the wall plane. If the rough opening is not flashed correctly, or the angle brackets are set loose, the window moves under load and the seal fails at the top corners first. That’s the failure we see most often when a Royal Palm Beach homeowner calls us to replace a garden window installed by a general contractor or a handyman. The NOA rating assumes the installation transfers load the way the engineering documents require.
Our install crew starts with a pre-install inspection of the rough opening, the wall framing, and the existing flashing condition. We set the window level, plumb, and square, shimming at the manufacturer’s specified points and anchoring through the frame into structural framing, not just stucco. The perimeter gets a low-expansion foam sealant per AAMA 812 practice, which gives us a continuous air and water barrier without bowing the frame. We follow AAMA 2400/2410 standards for the installation practice from start to finish.
Royal Palm Beach sits in a High-Velocity Hurricane Zone, which means your permit submittal will include the Florida Product Approval or Miami-Dade NOA documentation for this exact window configuration. We provide that paperwork and coordinate with your building department throughout the process. After installation, we run a water test on the perimeter, verify operation of the venting sashes if included, and clean the job site before we leave. We also confirm the shelf sill is secure and level, because that ledge is where you’ll actually live with this window every day.
Frequently Asked Questions - Garden Windows
Design pressure is matched to your specific wind zone, up to +/-100, and never higher. Royal Palm Beach is in a High-Velocity Hurricane Zone, so the window will be configured to meet FBC-HVHZ requirements for your exact address. We calculate the required pressure from your elevation, exposure category, and opening dimensions. Call (386) 251-6745 for an exact figure on your home.
Lead times vary by manufacturer and configuration, but most garden window orders from our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines land in a 6 to 10 week window after the order is placed and deposit is processed. We confirm current lead times on every quote, and we don’t cut the rough opening until the window is physically in our Royal Palm Beach warehouse.
Yes. In Royal Palm Beach, a permit for a window replacement in an HVHZ jurisdiction requires the Florida Product Approval or Miami-Dade NOA documentation for the specific product configuration being installed. TruePane Windows & Doors pulls the approval documents for your exact window and includes them in the permit package. Call (386) 251-6745 and we’ll explain what your project needs.
Sizing is driven by your existing rough opening or, for new construction, the framing design. Within the manufacturer’s approved size range for each frame material, you can choose the glass package, finish color, venting or fixed side lites, and shelf sill configuration. Custom shapes or non-standard angles are generally not available, but we’ll tell you exactly what’s possible for your Royal Palm Beach opening before you commit.
Clean the frame and shelf sill with mild soap and water, and wipe down the gaskets and weep holes on the venting lites if your configuration includes them. Check the exterior perimeter sealant once a year, especially after a hurricane or heavy storm season. If you notice any cracking or separation at the top corners where the window meets the wall, call (386) 251-6745 for an inspection before water finds a path inside.
Get a Quote - Garden Windows in Royal Palm Beach
A garden window is a small project with big returns in daily light and usable kitchen space, but only if the glass, frame, and installation are right for your specific Royal Palm Beach address. We’ll measure your opening, spec the correct design pressure, and walk you through glass and finish options. Call TruePane Windows & Doors at (386) 251-6745 to schedule a free on-site measurement or start your quote.
Written by the team at TruePane Windows & Doors, serving Royal Palm Beach, FL and surrounding Palm Beach County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
