Entry Doors

Entry Doors in Royal Palm Beach, FL | TruePane Windows & Doors

Entry doors carry more weight in South Florida than almost anywhere else in the country. They’re your home’s first impression, sure, but they’re also the single largest opening in your exterior envelope when a storm tracks toward Palm Beach County. At TruePane Windows & Doors, we install Therma-Tru fiberglass and steel entry door systems across Royal Palm Beach that are engineered to hold their impact rating without looking like bunker equipment. If you’re replacing a builder-grade front door or planning new construction in the Village of Royal Palm Beach, call (386) 251-6745 and we’ll walk you through what fits your opening, your exposure, and your style.

Call (386) 251-6745

Product Overview - Entry Doors

A proper Florida entry door is not just a door. It’s a complete opening system: slab, frame, threshold, hardware prep, and glass that is either laminated impact rated or eliminated entirely in solid-panel configurations. The Therma-Tru lines we install across Royal Palm Beach pair fiberglass and steel construction with factory-finishing technology that holds color far longer than site-painted wood ever will. You get the architectural presence of a true raised-panel or modern slab door, but the performance comes from materials that don’t cup, swell, or rot in Palm Beach County’s humidity.

Where this product earns its keep is in the engineering. Therma-Tru fiberglass and steel entry door systems are built to take an impact rating without giving up curb appeal. Factory-finished and paint-grade options are both available, which means specifiers and homeowners in developments like Madison Green or the estates off Crestwood Boulevard can hit a precise design language without sacrificing compliance. The slab is up to 48 inches wide, which handles most single-entry applications comfortably. You get the look you want, and the paperwork your permit needs.

We recommend these doors for front entries, side entries, and any perimeter door that must meet high-velocity hurricane zone requirements. They’re particularly well suited to the cluster of newer Mediterranean and contemporary builds going up around Royal Palm Beach, where curb appeal is non-negotiable but the wind zone is what it is. Call us at (386) 251-6745 to talk through your opening.

Technical Specifications

Here’s the spec sheet in plain language, because nobody wants to decode a manufacturer PDF before their coffee.

• Frame materials: Fiberglass and steel; both configured for HVHZ hardware anchoring.
• Maximum slab size: Up to 48 inches wide, standard heights, custom heights available per configuration.
• Glass options: Decorative impact glass inserts, Low-E insulated glass inserts, or no glass at all with a solid panel.
• Finish options: White, black, bronze, and a paintable woodgrain finish that takes site-applied color cleanly.
• Configurations: Single entry doors, single with sidelites and transoms, and double-door entries on qualifying openings.
• Threshold and sill: Adjustable composite sills, sealed and flashed per AAMA 812 with low-expansion foam perimeter sealant.

Hurricane & Compliance Performance

This is what separates an impact-rated door from a door that just looks impact-rated. Each of these six items matters when the inspector reviews your permit package in Royal Palm Beach.

Laminated Impact Glass - The glass packs a PVB (polyvinyl butyral) interlayer between two panes. When debris hits, the glass may crack but the interlayer holds the fragments in the frame, keeping the building envelope sealed and your interior protected from wind-driven rain. It’s the same principle automotive windshields use, engineered for structural openings.

Miami-Dade NOA / Florida Product Approval - Every configuration in this line carries a Notice of Acceptance and Florida Product Approval number, issued per configuration. That means the exact door you buy, in the exact size and glass package you choose, has documentation we include with your submittal. Verify on your specific quote, because the approval follows the configuration, not just the brand.

FBC / HVHZ Compliance - The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter of Florida’s two building code standards, and it governs Royal Palm Beach and the rest of coastal Palm Beach County. Your door will not be the weak point in your permit review.

TAS 201 / 202 / 203 Testing Context - This is the protocol family HVHZ-rated products are tested under. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. A door that passes all three has been beaten on with lumber, pressurized and depressurized thousands of times, and tested against prying. That’s the standard we’re comfortable putting on homes in Royal Palm Beach.

Design Pressure for Your Wind Zone - We match design pressure to your specific wind zone, up to +/-100, and never higher. That’s deliberate. A door rated for more than your zone requires costs you money for performance you’ll never use. We’d rather give you the exact rating your elevation, exposure, and zone call for, and document it cleanly for the permit.

Energy Performance - Low-E and insulated glass inserts are available for homeowners who want the entry to do double duty as a thermal envelope component. In Royal Palm Beach, that mostly means cutting solar heat gain on west-facing entries while keeping natural light. Solid-panel doors offer maximum thermal separation when visibility isn’t needed.

Color & Glass Options

Finish selection in Royal Palm Beach tends to split into two camps. Homes on the coastal-adjacent side, particularly the newer developments with clean modern lines, often go black or bronze for strong contrast against stucco and stone. White remains the dominant choice for traditional and Mediterranean elevations, where the entry should punctuate rather than dominate. The paintable woodgrain finish gives designers a true customizable base, particularly on homes where the front door ties into fence or garage-door color continuity.

On the glass side, decorative impact glass inserts are the most requested. They let you carry a design motif through the door, like a beveled or caming pattern, while staying within the impact-rated system. Low-E insulated glass is the pick for entries that take direct afternoon sun, common on west-facing frontages throughout the Wellington-adjacent neighborhoods of Royal Palm Beach. If privacy or maximum storm protection is the priority, the solid panel removes glass from the equation entirely. No glass, no glazing concerns, and a heavier, denser door feel. Give us a call at (386) 251-6745 and we’ll bring finish and glass samples to your home.

Installation by TruePane Windows & Doors in Royal Palm Beach

An impact-rated door is only as good as the hands that set it. We see it constantly in Royal Palm Beach: a door with a valid NOA, installed out of square or sealed with the wrong product, failing air and water testing and tripping the final inspection. The NOA rating presumes the door is anchored and sealed exactly as specified. Cut that corner and the paperwork means nothing.

Our installation process starts with a pre-install inspection of the rough opening, the existing buck if present, and the structural condition of the jamb framing. We don’t set anything until the numbers work. The door is set level, plumb, and square, then anchored per the NOA details for your wind zone. We seal the perimeter with AAMA 812 low-expansion foam and follow AAMA 2400/2410 installation practice throughout, which covers everything from flashing sequence to weep management. Every install gets a final water test before we call it done, and we clean up like we were never there, except for the new door.

Royal Palm Beach sits in a high-velocity hurricane zone, and the Village building department reviews door submittals carefully. We keep current on their permitting expectations, and our quotes include the documentation you need to move through plan review. If Hurricane Helene taught this area anything, it’s that the envelope matters more than the roof in a lot of wind-driven-rain scenarios. Your entry door is part of that envelope. We treat it that way.

Frequently Asked Questions - Entry Doors

What wind zone / design pressure is the Entry Door rated for?
Design pressures are matched to your wind zone, up to +/-100, and never higher. We size the door to your specific Royal Palm Beach location and exposure, then document the rating on your quote so it lines up with your permit package. Call (386) 251-6745 and we’ll confirm the right rating for your address.

What is the lead time?
Lead times depend on the configuration, glass package, and finish you select. Factory-finished doors move faster than custom paint-grade orders that need site finishing. We’ll give you an honest window on your quote, and we don’t cut it close on schedule promises. Call (386) 251-6745 with your door size and we’ll work backward from any hard dates you have.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. Royal Palm Beach falls under HVHZ rules, and the building department will want the Notice of Acceptance or Florida Product Approval documentation for the exact configuration you’re installing. We provide that with your submittal package as part of our permitting support. If you’re working with a contractor, we coordinate with them directly to keep the approval numbers matched to the door.

Can I customize the size or configuration?
Within the system’s tested parameters, yes. Slab widths run up to 48 inches, and sidelites and transoms are available on qualifying openings. Custom paint finishes are possible on the woodgrain substrate. What you cannot do is build a door outside the tested configuration and expect it to hold an NOA. We’ll show you what’s available within the approval, and that’s what we’ll sell you. Call (386) 251-6745 to talk through your opening.

How do I maintain the frame?
Fiberglass and steel frames are low-maintenance, but Royal Palm Beach’s salt air and afternoon storms mean you should rinse the frame and threshold monthly and inspect the perimeter sealant twice a year. Keep the weep holes clear, especially after storms, and re-apply a UV protectant to any painted finish annually. If you ever see moisture inside after heavy rain, call us, do not wait, because that’s an installation or sealant issue that only gets more expensive.

Get a Quote - Entry Doors in Royal Palm Beach

Ready to replace that tired, non-rated front door with a door that survives the inspection and the storm? We make the process simple: an on-site measurement, a written line-item quote with the exact NOA documentation, and an installation crew that treats your Royal Palm Beach home like their own. Call (386) 251-6745 today to schedule your free on-site measurement and get the project started.

Written by the team at TruePane Windows & Doors, serving Royal Palm Beach, FL and surrounding Palm Beach County communities with impact-rated windows and doors.