French & Double Doors

French & Double Doors in Royal Palm Beach, FL | TruePane Windows & Doors

French doors do more than connect a living room to a lanai. They decide how light moves through your home, how your furniture arranges, and whether a storm becomes a leak or stays outside. In Royal Palm Beach, paired impact-rated French doors with laminated glass in every lite are one of the most requested upgrades we quote, because they keep the classic look homeowners want while meeting the structural demands Palm Beach County actually enforces. TruePane Windows & Doors supplies and installs these across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines. Call (386) 251-6745 and we’ll walk your opening, check your wind zone, and price the right configuration.

Call (386) 251-6745

Product Overview - French & Double Doors

The profile we recommend most for Royal Palm Beach homes is a paired impact-rated French door with laminated glass carried through every lite. You get the symmetrical sightlines and the balanced look of a true divided-light door, but the outer lights aren’t decorative. Each carries a PVB interlayer that holds the glass in the frame if a windborne branch or tile fragment hits it. That matters on ground-level openings facing a rear patio, a pool deck, or a side yard where debris tends to collect during a storm.

What separates this product from a standard hinge door is the hardware system behind it. Multi-point locking heads and foot bolts engage the jamb at three or more points, not just the center latch. In high wind loading, that spread of contact points is what keeps the door slab from bowing or chattering against the weatherstripping. The frame choices, aluminum and vinyl, are engineered around that hardware, with reinforced stiles and meeting rails so both panels close flat and stay flat.

Architecturally, these doors work best where you want a wide interior-to-exterior opening without committing to a sliding wall. A 72-inch or 96-inch paired unit fits cleanly into great rooms, primary suites, and covered patio transitions. We see a lot of them in Royal Palm Beach when homeowners replace older sliding glass doors and want the swing-open feel instead. The catch is that swing doors need a properly flashed, square, level rough opening, and that’s where most installs go wrong. Our crews set every unit level, plumb, and square before anchoring, because an impact door that’s even slightly racked will leak at the threshold and fight the hardware for the life of the door.

TruePane Windows & Doors has been fitting hurricane-impact openings in this market long enough to know which configurations Palm Beach County reviewers flag, and which ones pass the first time. If you’re planning a new opening, expanding one, or replacing a pair that’s failed a water test, call (386) 251-6745 before you frame anything.

Technical Specifications

Here is what we typically specify for French and double door openings in Royal Palm Beach. We’ll confirm the exact configuration on your written quote, because design pressure and size limits shift with your wind zone and panel width.

• Frame materials: Aluminum (thermally improved profiles are standard on most lines) or vinyl, both with reinforced jamb and meeting rail construction for impact hardware.
• Maximum opening width: Up to 96 inches wide for paired configurations, depending on panel width, wind zone, and glass package.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated laminated, tinted laminated, and clear laminated.
• Finish options: White, Almond, Bronze, Black, and Tan. Finish availability varies by material; anodized and painted aluminum choices vary by line.
• Hardware: Multi-point locking heads with foot bolts on the inactive panel; adjustable hinges and adjustable threshold options on most configurations.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC High-Velocity Hurricane Zone requirements.

Hurricane & Compliance Performance

Laminated Impact Glass
Every lite in the door leaf, not just the center panels, carries a PVB (polyvinyl butyral) interlayer. When impact hits, the glass may fracture, but the interlayer holds the shards together and keeps the opening sealed. That’s the difference between a cracked pane and a breached envelope in the middle of a storm.

Miami-Dade NOA / Florida Product Approval
Each configuration we quote has a Miami-Dade Notice of Acceptance or Florida Product Approval number that corresponds to that exact combination of size, glass, and hardware. We list the approval number on your quote so your permit submittal is straightforward. Confirm it on your specific quote, because the approval that covers a 72-inch opening may not cover a 96-inch one.

FBC / HVHZ Compliance
These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements, which govern Royal Palm Beach and the rest of coastal Palm Beach County. That means the anchoring, the glass, and the door assembly were designed as a system for windborne-debris regions, not retrofitted to them.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products in this category are tested under the TAS protocol family. TAS 201 simulates large-missile impact. TAS 202 subjects the assembly to cyclic wind-pressure loading after impact. TAS 203 tests forced-entry resistance. When we quote a door for Palm Beach County, we’re quoting an assembly that has passed through that sequence, and the result is on the approval document.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. We don’t overspec a $600 upgrade for a zone that doesn’t require it, and we don’t undercut a zone that does. Your quote will show the required DP for your opening and the pressure rating of the door we select.

Energy Performance
Low-E and insulated laminated glass options are available for openings that catch hard western sun in Royal Palm Beach. A laminated outer pane with a Low-E coating and an insulating air space reduces heat transfer without giving up impact protection. Tinted laminated glass is another option for glare-heavy rooms.

Color & Glass Options

Finish choice in Royal Palm Beach usually follows the architecture. White and Almond stay with the traditional Florida ranch aesthetic and disappear into most stucco walls. Bronze and Black frame a more contemporary or Mediterranean elevation and hold up well against coral stone and paver tones. Tan splits the difference, pairing cleanly with warm neutrals and brown window frames on the same elevation. Aluminum lines generally carry the widest color range; vinyl lines are strongest in White and Almond.

Glass is a function of both exposure and privacy. Clear laminated is the standard baseline, and it’s right for shaded east or north openings where natural light is the priority. Low-E insulated laminated is our most requested upgrade for west-facing patio doors that bake every afternoon. Tinted laminated reduces glare and adds a layer of visual screening for ground-floor bedrooms or pool bathrooms without going to reflective film. We’ll help you sort through the options with your specific compass direction in mind, not a showroom chart.

Installation by TruePane Windows & Doors in Royal Palm Beach

A Miami-Dade NOA door that’s installed poorly is, at best, a nice-looking liability. The approval document assumes the unit is anchored, shimmed, sealed, and flashed according to procedures the manufacturer and code expect. We install to that standard in Royal Palm Beach and the surrounding Palm Beach County communities, and our process is built around it.

Before we remove anything, we inspect the opening. We check the rough opening dimensions, the moisture condition of the framing, and the condition of the sill. We’re looking for rot, termite damage, out-of-square framing, and old water intrusion that would compromise a new door before it’s even anchored. If the opening isn’t ready, we tell you. We’d rather fix the rough opening than flash over a problem and hope it disappears.

Then we set the door level, plumb, and square, which in an impact door means tuning the assembly so both panels meet evenly at the astragal and the multi-point hardware engages without dragging. The perimeter gets sealed with AAMA 812 low-expansion foam and flashed per AAMA 2400/2410 installation practice. A final water test on the sill and jamb corners completes the install before we walk you through the hardware, the locks, and the cleaning requirements for the frame and glass.

In Royal Palm Beach, we account for the site conditions that come with our wind zone. Ground-level openings near a lake or canal get a closer look at sill drainage. Walls facing east and southeast, where driving rain comes from, get an extra check on jamb flashings. If your municipality asks for the NOA or Florida Product Approval number on the permit submittal, we provide it with the quote. We know what the reviewers in this county look for, and we’d rather hand you a packet that passes on the first submission than make you chase paperwork after the fact.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Royal Palm Beach

If your existing French doors are showing their age, or you’re opening up a wall and want paired doors that hold up in a Palm Beach County storm, start with a measurement and a conversation. Call (386) 251-6745 to schedule a free on-site measurement. We’ll review your wind zone, your options across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and bring you a written quote with the NOA or Florida Product Approval numbers you’ll need. No pressure, just straight answers from a local crew that installs these doors in Royal Palm Beach every week.

Written by the team at TruePane Windows & Doors, serving Royal Palm Beach, FL.