Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Lake Park
Replacing a sliding or patio door in Lake Park isn’t the same job it is six miles west. The houses are older, the block walls are less forgiving, and the salt off the Intracoastal Waterway works on hardware year-round. A good door installed poorly will bind by August. A good door installed right will open with two fingers for twenty years. We do the second kind.
TruePane Windows & Doors has been setting sliders and patio doors in Lake Park long enough to know which of these 1950s CBS homes have been retrofitted already and which still have the original aluminum frame waiting to fail. We show up when we say, measure twice, and quote a written price before we touch a single block. If you’re in Lake Park and the door is sticking, leaking, or just tired, call (386) 251-6745 for a free estimate.
Why TruePane Windows & Doors Is Lake Park’s Preferred Sliding & Patio Doors Company
Most of the sliding door work we do in Lake Park comes from referrals, not search ads. Neighbors talk. When a crew spends the time to shim a rough opening square, flash the sill properly, and register both warranty layers before leaving the driveway, the homeowner mentions it at the next HOA meeting or over the fence. That’s the kind of reputation you build over four decades, not with a coupon.
Our technicians are background-checked and uniformed, and they know what a salt-air environment does to door tracks. We’re not sending a different subcontractor every time. The person who measures your opening is the person who installs your door. Our Sliding & Patio Doors crews carry the shims, jamb extensions, and marine-grade hardware Lake Park jobs actually need, because every third opening in this town is out of square and they know it before they pull the tape.
Dale Kessler founded this company on a rule that still governs every install: if the pane is not true, the job is not done. That’s not a slogan. It’s the reason we’re still answering the phone in Lake Park when other contractors have folded or moved on.
Our Sliding & Patio Doors Services in Lake Park
Patio Sliding Doors
Standard two-panel and three-panel patio sliders are the most common replacement we do in Lake Park. The existing doors are usually original to the home, meaning single-pane glass and aluminum frames that have been fighting Intracoastal salt for fifty or sixty years. We replace them with impact-rated, dual-pane units sized to the actual opening, not the nominal size, because 1950s block walls rarely cooperate with off-the-shelf dimensions. A typical patio sliding door replacement in Lake Park runs $2,800 to $5,500 depending on panel count and glazing.
Heavy-Duty Sliding Doors
For wider openings, lake-facing rear walls, or homeowners who want a door with real weight to it, heavy-duty sliders are the move. We’re talking reinforced frames, stainless steel rollers, and interlocking panels that can handle a wind event without chattering. In Lake Park’s Wind-Borne Debris Region, this is not an upgrade; it’s what the building code expects. Heavy-duty sliding door installations here start around $4,500 and go up from there based on span and impact rating.
Pocket & Barn Doors
Pocket doors make sense in Lake Park’s smaller 1940s and 1950s floor plans, where swing clearance is tight and wall space is scarce. They also demand more care in an older block home, because the wall cavity often isn’t deep enough to hide a modern pocket frame without modification. We’ve installed pocket doors in Lake Park homes where the alternative was losing a closet entirely. Barn doors, mounted on heavy-duty track, work well for wider openings and add an architectural touch without eating floor space. Both start around $1,800 to $3,200 installed, depending on hardware and door slab.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Park
We’re an authorized installer for more than a dozen manufacturer lines, and for Lake Park homes we lean into brands that hold up to coastal exposure. CWS and ES Windows both produce impact-rated sliding doors with marine-grade hardware that resists the same corrosion that eats generic aluminum tracks. ECO Window Systems offers a strong PVC option for homeowners who want thermal efficiency without sacrificing impact ratings. We quote these lines side by side on paper so you can see exactly what you’re buying, and we keep common replacement parts on the truck when we roll into Lake Park.
Common Sliding & Patio Doors Problems We See in Lake Park Homes
- Salt-pitted tracks and seized rollers. What the Intracoastal puts in the air, it also puts on your door hardware. Non-marine-grade aluminum tracks corrode within a few seasons here, and the door starts binding or jumping the rail. We replace those tracks with marine-grade components and stainless rollers.
- Rusted header framing from old steel jalousie conversions. Homes that once had the original steel-framed jalousie windows often got sliding door retrofits decades ago with undersized or now-rusted headers. A modern dual-pane slider is heavier, and that old header sags. We fix the framing before we set the door.
- Failed sill waterproofing. Wind-driven rain off the Intracoastal pushes water behind the door frame if the sill wasn’t flashed correctly. That rots the wood buck and crumbles the block mortar around the opening. We tear out the rot, rebuild the sill, and flash it with butyl tape so water stays outside where it belongs.
- Fogged glass seals. The humidity and salt air in Lake Park accelerate seal failure on older dual-pane doors. When the seal goes, the glass fogs. Depending on the frame, we can often replace just the insulated glass unit instead of the entire door.
Pricing for Sliding & Patio Doors in Lake Park, FL
Here are the numbers, straight up. A simple two-panel patio slider in Lake Park runs $2,800 to $5,500 installed. A three-panel slider or a heavy-duty unit with a wider span falls in the $4,500 to $8,000 range. Pocket doors and barn doors are $1,800 to $3,200. If your rough opening is out of square, which it often is in Lake Park’s older CBS construction, labor runs a little higher because we build custom jamb extensions rather than forcing the frame. That’s a line item, not a surprise. You’ll see it before we start.
Every quote is a written line-item price. Nothing gets added after the fact unless you approve it in writing first. Call (386) 251-6745 and we’ll come out, measure the opening, check the header and sill, and hand you a number you can plan around.
We Also Serve Cities Near Lake Park
Beyond Lake Park itself, our crews take sliding and patio door jobs in Royal Palm Beach, Loxahatchee Groves, Westlake, and Westgate. Some of those areas have newer construction and fewer out-of-square block openings, but the salt air doesn’t care about the year on the deed. We bring the same materials and the same standard to every job.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Lake Park
Yes, if the door is being replaced under a permit, Palm Beach County’s Wind-Borne Debris Region code requires impact-rated glazing or shutters on any new opening, regardless of the age of your home. Grandfathered status applies to what’s already installed; it doesn’t exempt you from code on new work. We quote impact-rated doors as standard in Lake Park and handle the permitting, so you’re never trying to slide a non-compliant door past the inspector. Call (386) 251-6745 for a free estimate on an impact-rated replacement.
The Intracoastal sits less than a mile from most Lake Park homes, and prevailing winds carry fine salt spray across the town. That salt pits bare aluminum tracks and corrodes rollers within a few seasons. Inland communities like Royal Palm Beach get a fraction of that exposure. The fix is marine-grade hardware: stainless steel rollers, anodized frames, and track materials designed for coastal use. Most off-the-shelf sliding doors are not built for that environment, which is exactly why we quote coastal-rated lines for Lake Park.
We don’t force it, and we don’t shove a door into a bad opening. We build custom jamb extensions that take up the discrepancy, square the frame as it sits, and fasten through the block with the right anchors. On a 1950s home off 10th Street, we pulled a corroded aluminum patio slider whose track had seized from Intracoastal salt spray. The rough opening was 3/4″ out of square, so our crew built custom jamb extensions, installed a fusion-welded Andersen 400 Series gliding door with impact-rated glazing, and flashed the pan with butyl tape before resetting the stucco. No cracks, no air leaks. That’s how we handle it.
If the frame and track are in good shape, we can usually replace just the insulated glass unit, not the entire door. Fog between the panes means the seal has failed, and in Lake Park’s humidity that failure accelerates once moisture gets inside. However, older aluminum frames with salt corrosion are often not worth saving, because you’d be paying for new glass in a frame that’s already half gone. We inspect the frame first and tell you honestly which way to go. It does not cost you anything to have us look.
Most standard sliding door replacements in Lake Park are done in a single day. The wildcard is the rough opening. If we find the header sagging, the sill rot, or the opening significantly out of square, the job extends to two days because we’re rebuilding framing, not just swapping a door. We’ll tell you exactly what the schedule looks like before we start, and we don’t leave you with a boarded-up opening overnight without telling you in advance. Call (386) 251-6745 to schedule the measurement and get a written timeline.
Call TruePane for Sliding & Patio Doors in Lake Park, FL
If your Lake Park sliding door is binding, leaking, fogging, or just worn out, don’t wait for the salt air to finish the job. Call (386) 251-6745 and we’ll send a background-checked technician to measure your opening, check the framing, and put a free, written estimate in your hand. No pressure, no gimmicks, no surprise line items. We’ll be there when we say. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park with years of glass and door craft behind every install.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.