Simonton Door Installation Nationwide | TruePane Windows & Doors

Simonton Door Installation: The Royal Palm Beach Owner’s Guide

If you have a Simonton door that needs professional installation in Royal Palm Beach, we handle it. Typical installed pricing for a Simonton door replacement runs $1,850 to $4,600 in this market, depending on the door type, size, and whether it’s impact-rated. Most single-door installations are completed the same day. The way most Royal Palm Beach homeowners discover a door has failed is gradual: the door starts dragging against the threshold in the humid summer months, the lock no longer lines up with the strike plate, or a hairline crack appears along the bottom rail that widens after every afternoon rainstorm.

Call (386) 251-6745

Which Simonton Models This Applies To

Simonton builds several door lines, and the installation requirements are not the same across all of them. The most common models we install in Royal Palm Beach are the Simonton 6500 and 9800 series hinged patio doors, along with the Madeira sliding door line. Each uses different frame depths: the 6500 series runs a 4-9/16 inch jamb depth, while the 9800 series steps up to 5-1/4 inches. That gap matters when the rough opening was framed for the thinner unit and someone tries to slide in the thicker one without adjusting the interior trim or adding jamb extensions. We measure every opening twice before ordering, because a Simonton door ordered wrong is a two to three week delay in Royal Palm Beach, and nobody wants a plywood-covered opening when the afternoon thunderstorms roll through.

To identify your Simonton door, look for the AAMA certification sticker on the hinge side of the door panel or on the head jamb. It will list the series number and the manufacture date. If the sticker is gone, measure the actual door slab thickness: most Simonton hinged doors run 1-3/4 inches, but some older Madeira units were built at 1-3/8 inches, and the replacement options for that thinner slab are limited. On the OEM versus aftermarket question: for Simonton door hardware, hinges, and weatherstripping, we stock OEM equivalents that match the original millwork. TruePane is an independent service provider, not a Simonton factory outlet. We also keep parts on hand for Andersen, and Pella doors, so whatever you have, we can usually match it.

Signs Your Simonton Door Installation Is Failing

• Water staining at the bottom corners of the interior door panel. This usually means the sill pan or the door’s weatherstripping has degraded. In Royal Palm Beach, we see this most often on west-facing doors that catch the late-day rain driven by offshore winds.
• The door binds or drags at the top or latch side. Vinyl door frames expand in Florida heat. A door that was installed without proper shimming and clearance will bind every July and loosen every January. The underlying cause is usually insufficient gap allowance at the time of the original install.
• The lock no longer throws fully into the strike plate. When a Simonton door settles or the hinges wear, the alignment shifts. Forcing the lock just makes the problem worse and eventually strips the screws holding the strike plate to the jamb.
• Condensation or fogging inside the door glass. This is a failed insulated glass unit. On Simonton doors, the door slab typically has to be reglazed or the insert replaced, which is a job for someone who does glass work regularly, not a general handyman.
• The door no longer closes on its own and hangs open an inch or two. This points to worn hinges or a frame that has twisted slightly out of plane. It is also an open invitation to every summer bug and every air-conditioned dollar leaving the house.

Replacement Cost & What’s Included

Installed Simonton door replacement in Royal Palm Beach generally lands between $1,850 and $4,600. A standard 36-inch by 80-inch Simonton hinged patio door with no impact glass starts around $1,850 to $2,600 installed. A 72-inch Madeira sliding door runs $2,400 to $3,800. Impact-rated Simonton doors, which many Royal Palm Beach homeowners choose for insurance reasons, typically add $1,200 to $2,000 to the bottom line. What changes the price: the size of the opening, whether the existing frame can stay or must be pulled, whether the door is impact-rated, and whether stucco or trim work is needed after the install.

Every quote we give in Royal Palm Beach is a written, line-item price. The labor, the door, the hardware, the disposal of the old unit, and the sealing are all on the paper before we start. Both Simonton warranty layers get registered in writing before our truck leaves your driveway, and our workmanship carries the Done Right Promise. If it is not done right, we make it right. No paperwork fight, no fine print.

DIY or Call Us?

Door installation is not a casual weekend project, and Simonton doors are unforgiving to shortcuts. What you can safely do yourself: check the existing door for squareness with a tape measure, note where it binds, and verify the model number so you know what you’re working with. What you should not do yourself is remove a hinged door slab with a glass insert, or attempt to pull and reset a frame. The glass in a Simonton door panel is tempered, which means it shatters into thousands of small pieces if it goes wrong, and the panel itself weighs more than most people expect. We have been called after more than one Royal Palm Beach homeowner learned that lesson the hard way. If the frame is out of square, the rough opening needs adjustment, or the sill is compromised, that is a job for someone who does this every week. Call (386) 251-6745 and we will come measure it properly.

FAQs