Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Glass Railing Systems in Royal Palm Beach: What to Know First
We repair and install PGT glass railing systems throughout Royal Palm Beach, and we do it as an independent PGT service provider. Most railing repairs take one visit, with parts on the truck or at our Royal Palm Beach supply house within two business days. Honest posture on cost: a PGT glass panel replacement typically runs $380 to $620 per panel on site, and a full rail section rebuild starts around $1,200. If you own a PGT railing and something is loose, cracked, or clouded, call (386) 251-6745 and a real person answers.
How PGT Products Fail - and How We Fix Them
PGT builds a solid product, but railing systems live outside. Salt air, afternoon sun, and pool chemistry do the rest. Here is what we actually see on PGT glass railing jobs across Royal Palm Beach.
- Clouded or hazy glass panels in the PGT frameless line. This is usually seal failure at the laminated-glass edge, accelerated by years of our humid, salt-laden air working into the interlayer. The glass doesn’t rebuild itself. We remove the panel, measure the chase precisely, and set a replacement with a seal rated for coastal exposure, not a generic silicone bead.
- Loose top rails on PGT interior glass railing. The rail-to-post connection loosens when the original installer torqued the set screws without a calibrated driver. We see this on stair railings where vibration, not weather, is the culprit. Our fix is remounting with nylon-lock hardware and re-torquing to PGT’s published spec. No stripped screws, no wood shims.
- Wobble at the deck-mounted post base. On PGT exterior deck railing, the post anchor was often set into concrete without enough embedment. After a few seasons of afternoon downpours and direct sun, the expansion anchor relaxes. We core-drill and reset the post base with a structural epoxy, then re-level the entire run so every panel lines up.
- Spider cracks radiating from the clamp points on pool & spa glass fencing. The glass got nicked at the clamp edge during the original install, or a wind gust over-flexed a panel that was slightly mis-spaced. Either way, it’s a replacement panel. We match PGT’s glass thickness and tint from our Palm Beach County supplier, then set the clamp gap with a feeler gauge so the next storm doesn’t finish the job.
- Green or black staining at the bottom channel of framed PGT railing. This is standing water that never drains because the weep holes were clogged or never punched. In Royal Palm Beach, that water sits and breeds algae in the channel. We rout out the weeps, treat the track, and if the frame is corroded beyond saving, we pull it and set a new section with proper drainage pitch.
Our PGT Glass Railing Systems Process
Every PGT job follows the same unhurried steps. No shortcuts, no change orders slipped in at the end.
- 1
Call and describe what you are seeing. You’ll get a person, not a recording. We ask enough to know whether we should bring glass or hardware.
- 2
Site measurement and diagnosis. Our technician measures every opening twice, checks the glass thickness, post spacing, and the condition of the seal. If it’s a warranty-eligible PGT defect, we document it in writing for your claim.
- 3
Parts decision on paper. We quote OEM PGT components when they are available and aftermarket when they are equal or better for less money. You see both numbers side by side before anything is ordered.
- 4
The repair or install. Uniformed, background-checked techs do the work. We mask off work areas, set panels level and plumb, and torque everything to manufacturer spec with calibrated tools.
- 5
Test and walk-through. We check each panel for deflection, run water over the bottom channels on exterior railing, and make sure every clamp is seated. You walk the rail with us before we leave.
- 6
Warranty registration before the truck pulls out. Both manufacturer warranty layers are registered in writing, durations stated, and our Done Right Promise applies to the whole job.
What PGT Glass Railing Systems Costs in Royal Palm Beach
Here are honest ranges for the PGT railing work we do most often in Royal Palm Beach and the surrounding communities.
- Single frameless glass panel replacement: $380 to $620 on site, depending on panel width and glass thickness
- Tightening and re-torquing a loose top rail or post clamp: $150 to $240 flat for the service call and labor
- Full rail section rebuild with new hardware: $1,200 to $2,800, depending on linear feet and whether posts reset into concrete
- Pool & spa glass fencing panel replacement: $450 to $750 per panel including matching PGT glass and new clamp seals
- Complete interior glass railing for a standard stairway: $3,800 to $6,500 installed, measured and set by our own crew
What moves the price is glass thickness, whether the posts need resetting, and access. A second-story deck rail runs more than a ground-level pool fence. We quote fixed pricing up front and don’t pad the bill after the fact. Call (386) 251-6745 for a free estimate with written line items.
Why Royal Palm Beach Homeowners Call TruePane Windows & Doors for PGT Work
Dale Kessler grew up off Crestwood Boulevard in Royal Palm Beach, and he learned glazing, framing tolerances, and Florida building code at Palm Beach State College. That local foundation is why our PGT work holds inspection the first time. Every job carries the Done Right Promise: if it is not right, we make it right without paperwork or argument. A live person answers the phone 24 hours a day. And when a PGT part is discontinued or backordered, we can quote comparable lines from Andersen, Pella, or CGI side by side on paper so you know exactly what you are buying. We have been serving Palm Beach County homeowners since 2008, and we plan to be here in thirty more.
FAQs
No. We are an independent PGT service provider, not an authorized factory dealer. That independence means we can quote aftermarket parts when they are the better value, and we can flag warranty issues with your best interest in mind rather than a franchise contract’s.
Replacing glass with a panel that matches PGT’s thickness, tint, and structural rating should not void a valid PGT warranty, but we recommend you confirm with PGT before approving the work. Call (386) 251-6745 and we’ll help you document exactly what is being done so your claim stays clean.
Most repairs are completed in a single visit once we have the right glass or hardware on the truck. If we need a special PGT panel matched to your existing tint, expect two business days from our Royal Palm Beach supplier.
If the panels are hazed or spider-cracked in more than two places, replacement usually costs less than piecemeal repairs over the next few seasons. We give you both numbers in writing and you decide. Estimates are free at (386) 251-6745.
When the job requires a permit, yes, we pull it and schedule the inspection. If it is not sealed right, the next storm will tell you. We would rather the building inspector tell us first, and our work passes the first time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.