Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Roof Replacement & Installation in Royal Palm Beach: What to Know First
We provide independent CWS roof replacement and installation in Royal Palm Beach, with most jobs quoted within two business days and scheduled inside a week once materials are approved. The honest price posture is this: a proper CWS replacement costs what it costs, and we put the numbers on paper before any work begins so you know exactly where you stand. If you own a CWS roof in Royal Palm Beach and something is failing, call (386) 251-6745 and we will walk you through what we look for.
This page is for homeowners in Royal Palm Beach who bought a CWS roof, have lived with it for years, and now need straight answers about replacement versus repair, what parts still exist, and what a fair job should look like. Dale Kessler has spent the better part of three decades measuring, setting, and sealing windows, doors, and roofing components across Palm Beach County, and the standard here has not changed since day one: if it is not sealed right, the next storm will tell you.
How CWS Products Fail - and How We Fix Them
- CWS standing seam panel lift at the eave line. We see this consistently on older CWS installations in Royal Palm Beach where the original installer under-torqued the clip system. Florida afternoon heat expands the aluminum, the clip loses grip, and the panel works loose at the drip edge. The fix is a full clip replacement along the affected runs, not a caulk bead over the gap. Caulk is a band-aid. We replace the mechanical fastener.
- Neoprene washer degradation on exposed fasteners. CWS roofs installed in the early 2000s often used fasteners with neoprene washers that harden and crack under Palm Beach County UV. Once the washer fails, water follows the screw shank into the decking. We pull the failed fasteners, inspect the decking beneath, and re-fasten with EPDM washers rated for coastal exposure. It is a slow leak that most homeowners never see until the ceiling stains.
- CWS ridge cap seal failure at the transition. The ridge cap on CWS panels depends on a factory-formed closure strip that breaks down after fifteen-plus years of heat cycling. When it goes, wind-blown rain gets pushed under the cap and runs the length of the ridge. We replace the closure strips and re-bed the cap with an approved sealant, then run a water test on the entire ridge line before we call the job done.
- Incorrect panel overlap on retrofit jobs. We have torn off CWS roofs in Royal Palm Beach where a previous contractor reversed the panel lap direction against prevailing wind. Water gets driven into the seam during a summer squall and the roof leaks from day one. A proper CWS installation laps panels away from the prevailing weather direction. We correct the lap when we replace panels, and we document it on the quote so you can see exactly what was wrong.
- Damaged CWS closure strips and end caps after flying debris. A branch or tile from a neighbor’s roof takes out an end cap and the closure strip behind it. The panel itself survives, but the opening invites insects and wind-driven water. We keep common CWS extrusions and closure profiles in stock or sourced within days, and we can usually restore the end cap without replacing the full panel.
Our CWS Roof Replacement & Installation Process
- 1
Call and talk to a person. You call (386) 251-6745. A live person answers. We ask about the roof, the age, what you are seeing, and we set a date to come out.
- 2
Site inspection and measurements. We walk the roof, measure the panels, check the decking, and identify exactly which CWS components are compromised. We take photos and show you what we find while we are still on the ladder.
- 3
Written line-item quote. We price the job on paper: panels, fasteners, closure strips, labor, and any decking repair. You see every number before you approve anything. No allowance games, no “we will figure it out later.”
- 4
Parts decision with you. If OEM CWS parts are still available and within reach, we quote them. If a quality aftermarket equivalent is the smarter money, we show both options side by side and explain the trade-off honestly. You decide with full information.
- 5
Replacement and installation. Our techs do the work, follow the manufacturer’s installation tolerances, and keep the job site clean. We register any applicable warranty layers in writing before the truck leaves your driveway.
- 6
Final water test and walkthrough. Before we pack up, we run a water test on the repaired or replaced sections and walk the roof with you if you want to see it. If it is not done right, we make it right under the Done Right Promise. No paperwork fight. No fine print that covers neither.
What CWS Roof Replacement & Installation Costs in Royal Palm Beach
CWS roof replacement in Royal Palm Beach usually lands between $900 and $2,800 for a partial panel and fastener replacement, and between $12,000 and $24,000 for a full roof replacement on an average single-story home. The spread comes down to roof size, panel profile, how much decking needs to be pulled, and whether OEM CWS parts are still in production for your series.
- Fastener and washer replacement only: $900 - $1,500 depending on panel count and roof pitch.
- Ridge cap and closure strip replacement: $1,200 - $2,400.
- Partial panel replacement with decking repair: $2,800 - $6,500.
- Full CWS roof replacement: $12,000 - $24,000, with the final number driven by square footage and material choice.
We do not charge for the estimate, and the price we quote is the price on the bill. Call (386) 251-6745 to schedule a free estimate and get exact numbers for your roof.
Why Royal Palm Beach Homeowners Call TruePane Windows & Doors for CWS Work
We have been working in Royal Palm Beach since 2008 through a heritage of craft and community commitment, and our techs know CWS roofs because they have touched enough of them to know what fails and why. Every job is covered by the Done Right Promise backed by The Keystone Standard: both warranty layers registered in writing, durations stated, workmanship guaranteed for 90 days with no arguing. If a CWS panel goes wrong after we install it, we fix it. That is the whole promise.
We are also authorized installers for more than a dozen other manufacturer lines, including PGT, CGI, ES Windows, and ECO Window Systems. If a full CWS replacement does not make sense and the smarter play is a switch to a different product, we will put the options on paper side by side so you see exactly what you are buying. We hire local, we train apprentices into journeymen, and we answer the phone when you call.
FAQs
It depends on the series and the year of the original installation. Some older CWS profiles and closure extrusions are still available through distributors we work with; others are discontinued and require a quality aftermarket equivalent. We check availability before we quote, and we show you both OEM and aftermarket pricing side by side when both exist. Call (386) 251-6745 and we will check your specific roof series.
If the decking is still sound and the failure is limited to fasteners, closure strips, ridge cap, or a few panels, a repair is usually the right call. If you have multiple panels lifting, widespread fastener failure, or decking rot from long-standing leaks, replacement becomes the more honest investment. We will tell you which way the numbers and the condition of your roof point. Estimates are free.
No. We quote on paper, and the only time a number changes is if we find hidden decking or structural damage that was impossible to see before the old roof came off. If that happens, we stop, show you the problem, and get your approval in writing before we proceed. Our price is a square deal, and it stays that way.
A partial replacement with fasteners and closure strips is usually completed in one day. A full CWS roof replacement on an average Royal Palm Beach home takes three to five working days depending on weather and roof complexity. We will give you a written timeline before we start and we will be there when we say.
Yes on both counts. We handle the permitting, we pull permits and pass inspections, and we register every warranty layer in writing before the truck leaves the driveway. You will have the paperwork in hand before we hand you the final bill.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.