Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Impact Windows in Royal Palm Beach: What to Know First
Mr-Glass impact windows in Royal Palm Beach can be serviced, repaired, and replaced by our team at TruePane Windows & Doors, and most jobs are completed in a single visit. We work on Mr-Glass products as an independent Mr-Glass service provider, which means we answer to you rather than to a manufacturer’s playbook. Typical turnaround runs two to five business days for parts we do not already carry on the truck, and every quote we give is a written line-item number before any work starts.
This page is written for the homeowner who bought a Mr-Glass product years ago, has lived with it through a few hurricane seasons, and now needs straight answers about whether to repair or replace. If that sounds like you, call (386) 251-6745 and a live person picks up. Not a voicemail tree. Not a callback form. A person who works here.
How Mr-Glass Products Fail - and How We Fix Them
Every window brand has its own habits. Mr-Glass products are no exception, and after years of opening them up across Palm Beach County, we know what to look for before we even pull the trim. Here are the failures we see most on Mr-Glass impact windows in Royal Palm Beach homes, along with what we actually do about them.
- Interlayer clouding on Mr-Glass laminated impact glass. The laminated interlayer inside impact-rated glass can begin to haze or cloud near the edges after ten to fifteen years of South Florida humidity cycling. We see this on Mr-Glass products with aluminum frames more than vinyl. The haze is not a seal failure; it is the interlayer itself breaking down, and the fix is glass replacement rather than a seal repair. We measure the opening twice, order the correct laminated unit, and set it to the manufacturer’s original tolerance.
- Weep hole blockage on Mr-Glass horizontal sliders. Mr-Glass slider frames have weep holes that are smaller than most and clog with Royal Palm Beach’s fine construction dust and pollen. When they block, water pools inside the track and eventually works into the wall cavity. The symptom an owner notices is a slider that feels heavy or a musty smell near the baseboard. We clear the weep system, verify drainage, and seal the frame corners if the original sealant has dried out.
- Roller wear on Mr-Glass Series 700 and 800 sliders. These are the workhorse Mr-Glass lines we see most often in Royal Palm Beach homes built in the 1990s and early 2000s. The rollers are nylon and eventually flat-spot, which makes the panel drag or bind in July heat. We replace them with either OEM rollers when warranty coverage requires it or a quality aftermarket stainless-bearing roller that outlasts the original. The choice is on paper, side by side, so you decide with the numbers in front of you.
- Weatherstripping compression on Mr-Glass casement and awning units. After years of South Florida sun, the compression gaskets on Mr-Glass casement windows lose their rebound. The window still closes, but the seal is not what it was, and that is exactly how water finds its way in during a driving rain. We replace the gaskets with material matched to the original profile and verify the seal with a water test before we call the job done.
- Frame separation at corner welds on older Mr-Glass vinyl lines. This is the one that scares owners, and honestly, it should be taken seriously. Mr-Glass vinyl frames from certain production years can develop hairline cracks at the welded corners, which lets air and water move through the frame itself. If the frame is still square, we can reinforce and seal the corner. If the frame is out of true, we will tell you plainly that replacement is the honest fix, and we will quote you a new impact unit rather than patch a frame that has already given up.
Our Mr-Glass Impact Windows Process
We do not treat a Mr-Glass job like a generic window call. Here is how it actually goes, step by step.
- 1
Call and diagnosis. You call (386) 251-6745. A live person answers. We ask what you are seeing, pull up your neighborhood, and schedule a visit. If it sounds urgent, we tell you when we can be there, and we keep that word.
- 2
On-site measurement and inspection. A background-checked, uniformed technician arrives and checks the opening, the frame, the glass, the hardware, and the seal. Every opening gets measured twice. We look for the failure mode specific to your Mr-Glass series rather than guessing from the symptom.
- 3
Parts decision on paper. If your Mr-Glass product is still under a warranty layer that covers the failed part, we use OEM. If it is out of warranty, we quote both OEM and a quality aftermarket equivalent when one exists, with the prices and the trade-offs written down. You decide. No surprise line items later.
- 4
The repair or replacement. We do the work in a single visit whenever parts are on the truck or readily available locally. The replacement glass is set to the manufacturer’s original tolerance, the seal is applied cleanly, and hardware is adjusted until the panel moves the way it should.
- 5
Testing and the Keystone Standard. Before we leave, we test the seal and the operation. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. If it is not done right, the Done Right Promise means we come back and make it right. No paperwork fight. No arguing.
- 6
Cleanup and leave-behind. We sweep up, haul off old glass and hardware, and leave you with a written record of what was done. You should not be able to tell we were there except that the window works again.
What Mr-Glass Impact Windows Costs in Royal Palm Beach
Straight numbers help, so here they are. Mr-Glass impact window work in Royal Palm Beach generally falls into three buckets, and the price moves with the series, the size of the opening, and whether we are repairing hardware or replacing glass.
- Glass-only replacement on a Mr-Glass laminated impact unit: $450 to $1,100 per opening, depending on size and whether the frame is aluminum or vinyl. This covers removing the old glazing, supplying new impact-rated laminated glass, and sealing to spec.
- Hardware repair on a Mr-Glass slider or casement: $180 to $420. Rollers, gaskets, weep clearing, and latch adjustment typically fall in this range. If the frame itself is cracked at a weld, the price moves toward replacement because the fix is not a patch job.
- Full replacement of a Mr-Glass impact window with a new impact-rated unit: $900 to $2,400 installed per opening. The spread accounts for size, frame material, and which manufacturer line we quote. We carry more than a dozen lines, so we show you side-by-side numbers and you choose with your eyes open.
What moves the price more than anything in Royal Palm Beach is second-story access, oversized openings, and whether the existing frame is square enough to reuse. If the frame is out of true, we say so plainly, because setting a new impact unit into a twisted frame is how you get a warranty void and a leak in the next storm. Call (386) 251-6745 for an exact written quote on your openings. Estimates are free.
Why Royal Palm Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work
Royal Palm Beach is where Dale Kessler grew up, off Crestwood Boulevard, and it is still where we do a good portion of our work. We have been measuring, setting, and sealing windows and doors across Palm Beach County for the better part of three decades, and we plan to be here for the next three, which changes how we treat every job. The Done Right Promise is written, not implied. Both manufacturer warranty layers get registered in writing with durations stated before we leave. That is the Keystone Standard, and we do not skip it because we know you have been burned before by a contractor who vanished the week after the check cleared.
A live person answers our phone 24 hours a day, seven days a week. Not a call center in another state. A person who works for us and knows the difference between a Mr-Glass Series 700 and a PGT WinGuard. If your Mr-Glass product is beyond saving, we will tell you that too, and we will quote you an honest replacement from the lines we carry, including PGT, CGI, CWS, and ES Windows. We are not trying to sell you a window you do not need. We are trying to be the last glass company you ever have to call.
FAQs
Yes, and it depends on the part. Hardware like rollers, latches, and gaskets is generally available either as OEM when your warranty requires it or as a quality aftermarket equivalent that often outlasts the original. Glass replacement is the bigger decision: if your Mr-Glass product is still under a warranty layer, we use OEM glass. If it is out of warranty, we show you the OEM price and a comparable impact-rated unit price and let you choose. Call (386) 251-6745 and we will check availability for your exact series before we schedule.
The honest answer is that it depends on the frame. If the frame is square, the seal surfaces are clean, and the failure is glass or hardware, repair is usually the right call and costs a fraction of replacement. If the frame has cracked at a corner weld or is out of true, repair becomes a patch job, and we will tell you that directly. Dale Kessler grew up in Royal Palm Beach and learned early that a bad fix costs twice what a good one does, so we do not recommend repairs we would not accept on our own homes. Call (386) 251-6745 for a straight assessment and a written quote.
If your Mr-Glass product is still under warranty, we use OEM parts and register the work properly so you do not lose coverage. If it is out of warranty, the question is moot, and the more important thing is that the new glass is impact-rated, set to the original tolerance, and sealed so the next storm does not find it. We register both manufacturer warranty layers in writing before we leave, with durations stated, so you know exactly what you are covered for and for how long. Call (386) 251-6745 and we will walk you through your specific warranty status.
Most Mr-Glass repairs in Royal Palm Beach are completed in a single visit when parts are local, and we carry the most common rollers, gaskets, and sealants on the truck. If we need to order a custom-sized laminated impact unit, you are looking at two to five business days from order to installation. We will tell you the timeline before we schedule, and we will be there when we say. Call (386) 251-6745 to lock in a visit.
We do both. If the repair makes sense, we repair. If the frame has given up or the product has reached the end of its useful life, we quote replacement with side-by-side options from more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows. You get the numbers on paper, the warranty registered in writing, and the Done Right Promise on the whole job. Call (386) 251-6745 for a free estimate on your Mr-Glass openings in Royal Palm Beach.
If it is not sealed right, the next storm will tell you. We would rather you hear it from us first. Call (386) 251-6745 to schedule your free estimate, and a live person will answer.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.