Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Shingle, Tile & Metal Roofing in Royal Palm Beach: What to Know First
Mr-Glass shingle, tile, and metal roofing work in Royal Palm Beach comes down to three things: correct flashing, correct fastening, and a roofer who understands how Florida wind and rain get past both. We’re an independent Mr-Glass service provider at TruePane Windows & Doors, and we handle repairs, replacements, and inspections on Mr-Glass roof systems throughout Royal Palm Beach with honest pricing and no change orders on the back end. This page is for Royal Palm Beach homeowners who own a Mr-Glass roof and want straight answers about what’s failing, why, and what it costs to fix. Call (386) 251-6745 for a free estimate.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass roof components fail the way most Florida roof systems fail: slowly, at the edges, then suddenly during a storm. Here are the patterns we see most often in Royal Palm Beach, along with what we do about each one.
- Tile slippage on Mr-Glass tile roof systems. Royal Palm Beach gets heavy afternoon downpours and occasional tropical-storm winds. Mr-Glass tile roofs with older mortar-set tiles start slipping when the mortar bed crumbles and the tile’s nail anchor rusts out. We reset slipped tiles with new fasteners and fresh mortar, and we check the underlayment underneath before the tile goes back on. A slipped tile is never just a cosmetic fix; it’s a water entry point.
- Shingle granule loss and cupping on Mr-Glass asphalt shingle lines. Mr-Glass shingle roofs in Royal Palm Beach sit under intense UV for most of the year. When granules wash into gutters and shingles start cupping at the edges, the waterproofing layer is compromised. We repair cupped shingles before they crack and expose the nail heads, and we always inspect the valley flashing on the same visit because that’s where hidden moisture collects.
- Metal roof seam separation on older Mr-Glass standing seam panels. Mr-Glass metal roofs expand and contract in Florida heat. On older standing seam systems, the seams can separate just enough to let wind-driven rain through. We reseal the seams with a roofing-grade sealant and check the panel clips underneath. The fix takes about half a day, but if the separation is left alone, the next strong storm will turn a seam issue into a ceiling stain.
- Flashing corrosion at Mr-Glass penetrations. Every pipe boot, vent collar, and chimney flashing on a Mr-Glass roof in Royal Palm Beach is working against salt air and humidity. We find corroded flashing on Mr-Glass roofs more often than on any other surface because the moisture collects at the base of the flashing and stays there. We replace corroded flashing with new metal and reseal the penetration before it becomes a leak.
- Underlayment deterioration on Mr-Glass tile roof systems. Tile roofs keep water out with the tile, but the underlayment underneath is the real waterproofing barrier. On Mr-Glass tile roofs older than 15 years in Royal Palm Beach, the underlayment is often dried out, cracked, or torn in spots. We inspect underlayment during every tile repair. If it’s gone, we say so, because replacing the underlayment is far cheaper than repairing the ceiling below.
Our Mr-Glass Shingle, Tile & Metal Roofing Process
- 1
Call and describe the issue. A live person answers at (386) 251-6745. We ask about the roof type, the age of the Mr-Glass system, and what you’re seeing or hearing.
- 2
We schedule the inspection. We come out, walk the roof, and document what we find. We take photos and show you exactly what’s happening up there.
- 3
Parts decision: OEM versus aftermarket. We tell you when a Mr-Glass OEM part is the right call and when a quality aftermarket part does the same job for less. We put both options on paper, side by side.
- 4
The repair. We fix the specific issue, whether that’s resetting tile, resealing seams, replacing flashing, or patching underlayment. We measure twice and install once.
- 5
Test and verify. We run water over the repaired area with a hose, inspect from below when possible, and walk you through what we did.
- 6
Stand behind it. Every job is covered by our Done Right Promise. If it’s not done right, we make it right. No paperwork fight, no arguing.
What Mr-Glass Shingle, Tile & Metal Roofing Costs in Royal Palm Beach
Mr-Glass roof repair in Royal Palm Beach typically runs between $225 and $1,400 depending on what’s failed. Here’s a breakdown of what we quote most often:
- Tile reset or replacement: $225 to $450 per area, including new fasteners and mortar.
- Flashing replacement at penetrations: $180 to $500 depending on the number of penetrations and the type of metal used.
- Shingle repair (granule loss, cupping, small patches): $250 to $600.
- Metal seam resealing: $300 to $750 depending on the length of seam work.
- Underlayment patch or replacement under tile: $400 to $1,400 depending on the square footage affected.
What moves the price is the age of the Mr-Glass system, the condition of the underlayment, and how many penetrations need attention. We give you a written, line-item quote before we start, and the number on that quote is the number you pay. Call (386) 251-6745 to schedule a free estimate.
Why Royal Palm Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We’ve been serving local communities since 2008, and we plan to be here in thirty more. Dale Kessler, our owner, grew up off Crestwood Boulevard in Royal Palm Beach and has spent the better part of three decades measuring, setting, and sealing roof systems and building components across Palm Beach County. When you call us about a Mr-Glass roof, you’re talking to a company that treats your house the way we’d treat our own mother’s. We’re also an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, so if a Mr-Glass roof issue turns out to be connected to a skylight, a roof-to-wall transition, or an exterior opening, we can handle that on the same visit. If it is not sealed right, the next storm will tell you. We’d rather fix it before that happens.
FAQs
No. Manufacturer warranties cover defects in materials, not repair work done by a qualified independent contractor. We use manufacturer-spec fasteners, sealants, and techniques so your Mr-Glass warranty stays intact where it applies. We can also document the repair in writing if you ever need to show the manufacturer what was done and why.
Yes. Mr-Glass replacement tiles, shingles, and metal panels are still available through roofing supply houses in Palm Beach County, though some older tile profiles have longer lead times. We keep relationships with local suppliers and can source most parts within a few days. If a specific Mr-Glass tile is discontinued, we’ll show you a matching alternative before we install it.
Repair makes sense if the damage is limited to a few tiles, a single flashing point, or a small section of seam separation. Replacement becomes the better call when the underlayment is failing over a large area or the roof is past 20 years old and showing wear in multiple zones. We’ll tell you straight which one applies, and we’ll never recommend a replacement if a repair will hold.
We schedule most Mr-Glass roof repairs in Royal Palm Beach within a few business days, and we’ll always tell you the honest timeline when you call. If you have an active leak, we’ll get someone out as quickly as the schedule allows to at least tarp or temporarily seal the area. Call (386) 251-6745 and we’ll give you a straight answer.
No. Estimates are free, and we give you the number in writing before any work starts. Call (386) 251-6745 to schedule yours.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Royal Palm Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.