Simonton Window Replacement Nationwide | TruePane Windows & Doors

Simonton Window Replacement: The Royal Palm Beach Owner’s Guide

If you have a Simonton window with a failed part, we keep the most common replacement components in stock and can usually complete the swap same day. Installed replacement costs in Royal Palm Beach typically run $185 to $480 for a single part, depending on whether we’re replacing a balance, latch, sash guide, or an insulated glass unit. Most homeowners discover the failure the same way: the window won’t stay open, the sash grinds against the frame, or condensation has appeared between the two panes where no amount of wiping will reach it.

Call (386) 251-6745

Which Simonton Models This Applies To

Simonton has manufactured dozens of series lines over the years, and parts are not universally interchangeable between them. In Royal Palm Beach we work most often with the Reflections 5500, DaylightMax 6500, Impressions 7500, and the older ProFinish and StormBreaker Plus lines. The fastest way to identify your series is the AAMA sticker on the top edge of the sash or the inside of the frame: it lists the model number, the manufacturing date, and the glass package. Write that number down before you call anyone, because a balance designed for a 5500 will not seat correctly in a 7500. For most replacement parts we recommend genuine Simonton OEM components over generics: the tolerances on pivot bars and cam locks are tight enough that aftermarket versions often bind within a season, especially in coastal humidity. That said, we stock both, and we will quote them side by side on paper so you can see the difference before deciding.

Signs Your Simonton Window Replacement Is Failing

• Sash won’t stay up or drops hard when released. This is almost always a worn spiral balance or a broken block-and-tackle spring. In Royal Palm Beach’s humidity, the nylon bearing inside the balance wears faster than the spring itself, and the window loses tension gradually.
• Sash binds or grinds when you tilt it open. Pivot bars and sash cams wear unevenly, usually because the window was forced or the tilt latch was never fully engaged. You’ll hear a scrape and feel resistance about two-thirds of the way through the tilt.
• Lock won’t catch or the cam won’t turn. Simonton cam locks have a die-cast housing that corrodes over time, especially on canalside homes where salt air moves through screens. The internal spring snaps and the handle spins without resistance.
• Condensation or fog between the panes. The insulated glass seal has failed. In South Florida this happens faster than the manufacturer’s estimates because our afternoon heat cycles expand and contract the sealant constantly. Once argon or krypton leaks out, the unit loses its thermal gap and the glass fogs permanently.
• Draft or water seepage at the meeting rail. Interlocking weatherstripping on Simonton sashes compresses over time. On west-facing windows in Royal Palm Beach, the afternoon sun bakes the vinyl and the seal loses its memory, which shows up as a thin line of dust or moisture along the center of the window.

Replacement Cost & What’s Included

Installed pricing in Royal Palm Beach runs as follows: a pivot bar or cam lock runs $185 to $275 including labor and the part. A complete balance replacement is $240 to $380 per sash, depending on series and weight class. An insulated glass unit for a standard Simonton double-hung runs $320 to $480 installed, more if the unit carries Low-E coatings or impact glass. What drives the range is whether the part is OEM or aftermarket, whether we’re doing one sash or both, and whether the frame shows any sign of prior installation damage. The price we give you on the phone is the price on the bill: parts and labor are line-itemed separately, and both manufacturer warranty layers are registered in writing before our truck leaves your driveway. Our workmanship is backed by the Done Right Promise, which means if the part fails or the installation was not true in the first ninety days, we come back and make it right with no paperwork fights.

DIY or Call Us?

Some things an owner can safely do before calling: note the AAMA sticker information, check if the tilt latches are fully engaged, and wipe the tracks clean of debris that might be causing a bind. But replacing a Simonton balance or pivot bar is not a casual Saturday job. The balance is under constant spring tension, and if it releases while the sash is removed, it can snap hard enough to send metal through drywall or into a hand. We have seen homeowners try the “$30 part from the internet” route and end up with a window that will not close square, which then costs more to correct than the original repair would have. If the pane is not true, the job is not done. Call us at (386) 251-6745 and we’ll tell you exactly what part you need, what it costs, and when we can be there.

FAQs