Casement Windows

Casement Windows in Royal Palm Beach, FL | TruePane Windows & Doors

Casement windows are the side-hinged, crank-operated workhorse of Florida hurricane protection. They swing outward on a vertical hinge and close against a full compression seal, which means they seal tighter than a sliding window ever will. For Royal Palm Beach homeowners who want impact protection without sacrificing airflow or curb appeal, this is the window that makes sense. TruePane Windows & Doors installs impact casements across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and we set every unit level, plumb, and square per AAMA 2400/2410 practice. If you’re replacing windows in Royal Palm Beach, call (386) 251-6745 and we’ll walk you through your options.

Call (386) 251-6745

Product Overview - Casement Windows

A casement window is a window that opens like a door. The sash is hinged on one side and swings outward with the turn of a crank, giving you a full, unobstructed opening from top to bottom. In Florida, that outward swing is exactly what you want from a hurricane window. When wind pressure hits the face of the glass, it pushes the sash harder into the frame, tightening the seal rather than trying to defeat it. A sliding window takes the same pressure broadside; a casement uses it to shut tighter.

The impact-rated casements we install in Royal Palm Beach and across Palm Beach County use laminated impact glass with a PVB interlayer. That’s the layer of polyvinyl butyral sandwiched between two panes of glass. Under impact, the glass may crack, but the interlayer holds the broken pieces in place and keeps the window in the opening. That’s the difference between a window that takes a hit and a window that becomes a hole in your house.

Architecturally, casements suit everything from mid-century ranch homes in the original Royal Palm Beach neighborhoods to newer Mediterranean-style builds in Madison Green or The Willows. We install them in aluminum and vinyl frames, with finish colors that work on both.

What really sets a quality casement apart is the compression seal. When you crank the sash closed, it presses against weatherstripping on all four sides, creating an airtight closure. That’s why casements are quieter and leak less air than sliding profiles, and it’s why a properly installed casement in Royal Palm Beach feels different the first time you close it. You can hear it seat.

Technical Specifications

Every casement we quote in Royal Palm Beach is sized to the opening, not pulled from stock. That means your design pressure rating, glass package, and finish are matched to your specific home, your specific wind zone, and your specific permit requirements. If you want casements for a second-story bedroom facing the lake or a ground-floor kitchen on the interior of the lot, the specs change. We account for all of it.

Hurricane & Compliance Performance

Laminated Impact Glass - The core of the system. Two panes of glass bonded to a PVB interlayer that holds the window intact under impact. The glass may fracture, but it stays in the frame. That’s the entire point: no opening, no pressurization, no blowout.

Miami-Dade NOA / Florida Product Approval - Each casement configuration carries a Notice of Acceptance or Florida Product Approval number. These are issued per configuration, not per product line, so the number for a 24″ x 48″ casement is different from one for a 36″ x 60″. We verify the exact NOA or FL approval on your specific quote before it goes to permit.

FBC / HVHZ Compliance - The Florida Building Code High-Velocity Hurricane Zone provisions govern everything we install in Royal Palm Beach. That’s not a marketing label. It’s a construction requirement enforced by the building department, and our casements are engineered to those provisions from the frame extrusion up.

TAS 201 / 202 / 203 Testing - HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading, which simulates the repeated gust cycles of a real hurricane. TAS 203 covers forced-entry resistance. When we say a casement is HVHZ-rated, this is the testing battery behind it.

Design Pressure for Your Wind Zone - Design pressures matched to your wind zone, up to +/-100, never higher. We don’t upsell you a rating you don’t need, and we don’t install a window rated below what your structure requires. Your wind zone in Royal Palm Beach determines the number. We match it.

Energy Performance Options - Low-E insulated glass is available on these casements. It reduces solar heat gain through the glass, which matters when your east-facing windows catch the morning sun eight months of the year. Tinted and clear glass round out the lineup, so you can prioritize glare control, visibility, or somewhere in between.

Color & Glass Options

Royal Palm Beach homes lean heavily on Florida coastal and Mediterranean styling: barrel tile roofs, stucco walls, arched entries. White casements are the classic choice for that look, and they’re still our most-installed finish in the area. Bronze and black have grown steadily in popularity for owners who want darker window lines against light stucco or cream-colored walls, particularly on newer construction in neighborhoods like Crestwood or Counterpoint Estates.

Almond and tan fill the middle ground. They’re warm neutrals that disappear into earth-toned exteriors and read softer than a stark white against a beige stucco wall. Aluminum frames in any of these colors give you a crisp, narrow sightline, while vinyl frames bring thermal performance and low maintenance to budget-conscious projects.

On the glass side, laminated impact glass is the foundation of every casement we install in Royal Palm Beach. You can upgrade to Low-E insulated glass for thermal performance, add tint for afternoon sun on west-facing elevations, or keep it clear for unobstructed views of the lake or preserve. Most homeowners in Palm Beach County end up with insulated Low-E impact glass once they weigh the comfort difference. We’ll show you samples and let you decide.

Installation by TruePane Windows & Doors in Royal Palm Beach

Here’s the uncomfortable truth about impact windows: the product matters, but the installation matters more. A Miami-Dade NOA-rated casement installed poorly is a hole in your wall with a nice label on it. The NOA rating assumes the window is anchored correctly, sealed correctly, and set level, plumb, and square. We treat that assumption seriously.

Every TruePane Windows & Doors installation in Royal Palm Beach starts with a pre-install inspection of the rough opening. We check the surrounding framing, look for rot or termite damage on older wood-frame homes, and verify the opening dimensions against the order. If the opening is out of square by more than our tolerance, we address it before the window ever comes off the truck.

We set each casement level, plumb, and square, shimming as needed and anchoring per the approved installation details for that specific product. The perimeter gets AAMA 812 low-expansion foam sealant, which fills the gap between the window frame and the rough opening without bowing the frame or pushing the sash out of alignment. Then we seal the exterior per AAMA 2400/2410 practice, which governs the installation of windows in exterior walls. It sounds technical, but the practical result is simple: when we’re done, water stays outside.

Royal Palm Beach brings its own considerations. Coastal exposure drives wind-zone design pressures even for homes a few miles inland, and Palm Beach County permitting departments review product approvals closely. We know what submittals the building department expects, and we make sure your NOA or FL approval documentation is ready before you file. After installation, we run a water test on the rough opening, inspect the operation of every crank and hinge, and clean up the site. When we leave, the window works like it’s supposed to, and your permit package is complete.

Frequently Asked Questions - Casement Windows

What wind zone / design pressure is the Casement Window rated for?
The casement’s design pressure is matched to your specific wind zone in Royal Palm Beach, up to +/-100, never higher. We don’t guess at this. Your property’s location, exposure, and the size of the window all factor into the rating on your quote, and we match it rather than upsell it. Call (386) 251-6745 to get the exact number for your home.

What is the lead time for casement windows?
Lead time depends on the manufacturer line, the glass package, and the finish you select. In Royal Palm Beach, most casement orders run several weeks from approval to delivery. If you’re working against a closing date or a contractor’s schedule, tell us on the first call, and we’ll tell you which lines can hit your timeline. Exact lead times come with your quote.

Do I need a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. Palm Beach County and the Village of Royal Palm Beach require product approval documentation for any impact window installation on a permitted project. We provide the NOA or Florida Product Approval number for your specific casement configuration with your quote, and we include the documentation in your permit package. It’s part of the service, not an add-on.

Can I customize the size or configuration?
Yes. Casements are built to your opening dimensions within the product’s allowed size range. You can also group casements with fixed picture windows, create corner configurations, or install them above and beside each other to maximize a view wall. We’ll go over what works structurally and what your wind zone allows. Call (386) 251-6745 and we’ll spec it out.

How do I maintain the frame?
Aluminum and vinyl frames need almost nothing. Wash the frame with mild soap and water a couple times a year, especially if you’re close enough to the coast for salt spray. Lubricate the crank mechanism and hinges with a light silicone spray annually. Check the weatherstripping when you clean, and keep the drain holes at the bottom of the frame clear. That’s the whole routine.

Get a Quote - Casement Windows in Royal Palm Beach

If you’re ready to replace the windows on your Royal Palm Beach home, start with a free on-site measurement. We’ll check your openings, talk through glass and finish options, and give you a written line-item quote with your specific product approvals. Call (386) 251-6745 to schedule yours.

Written by the team at TruePane Windows & Doors, serving Royal Palm Beach, FL and Palm Beach County with hurricane-impact windows and doors.