Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Palm Beach
Door installation in Palm Beach runs somewhere around $850 to $4,800 for most entry and French door replacements, and the final number depends on two things that rarely show up on a mainland quote: whether your home is on a landmark-designated lot and exactly how much salt damage the framing has absorbed over the years. TruePane handles both sides of that equation every week. If you’re off South County Road, along North Lake Trail, or tucked into a Mizner-era estate near the Everglades Club, call (386) 251-6745 and a live person will answer, not a voicemail tree.
Our Door Installation team knows Palm Beach well enough to predict what the opening will look like before we pull the first piece of trim. We have to. On a barrier island with the Atlantic on one side and the Intracoastal on the other, doors that looked fine on the surface are often hiding rot, corroded hardware, or framing that no longer meets current wind-load code once the walls are opened.
We arrive with the right tools, the right local knowledge, and a written quote that includes the permit and site-specific conditions in the contract. No verbal assurance. No “we’ll figure it out when we open it.” Just a square deal, on paper.
Why TruePane Windows & Doors Is Palm Beach’s Preferred Door Installation Company
Dale Kessler founded TruePane Windows & Doors in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That standard traveled well from our Miami-area dispatch office to Palm Beach, where our crews now work on a regular basis. We keep a live phone line answered 24 hours a day, seven days a week, and when a Palm Beach homeowner calls about a double French door that won’t latch after a storm line passes through, we hear from them directly.
Local reputation in Palm Beach matters more than anywhere we work, because the town is small and word travels through the barrier island quickly. Our technicians are background-checked and uniformed, and they work in a customer’s home the way they would work in their own mother’s. That’s not a slogan. It’s the standard Dale set on day one. When a Landmarks Preservation Commission inspector sees our work on a designated property, they see divided-light patterns matched, muntin profiles reproduced, and coral-stone surrounds left clean and intact.
Response time to Palm Beach is coordinated from our Miami (South FL) office, with crews scheduled locally so we’re not making you wait on a truck from Dade County. We quote manufacturer lines side by side on paper, register both warranty layers before the truck leaves your driveway, and stand behind the work with our Done Right Promise.
Our Door Installation Services in Palm Beach
Every door we install in Palm Beach has to clear two hurdles: Florida Building Code wind-load requirements and, on any designated historic property, the Landmarks Preservation Commission review. We handle both. Here’s how we approach the four most common door jobs on the island.
Entry & Swing Doors
Entry door installation in Palm Beach generally runs $850 to $2,900 depending on material, size, and whether the opening needs reframing. The salt-air exposure on the island means we recommend stainless hardware and properly flashed thresholds as standard, not upgrades. Corroded hinge screws and seized lock cylinders are the first signs a door is pulling away from its jamb and losing its wind-load rating. We catch that before it fails.

Double & French Doors
A double French door replacement in Palm Beach runs roughly $2,200 to $6,800 for impact-rated units, though custom arch work pushes beyond that. The older Mediterranean Revival estates along South Ocean Boulevard and down toward Phipps Plaza often have oversized French casements with coral-stone surrounds that standard door units can’t fit. We measure every opening twice, then order the doors to match, including divided-light patterns where the town requires it. On a landmark-designated Mizner-era estate, our crew removed an original arched double French door with rot in the jamb and failed flashing tape. The coral-stone surround and divided-light pattern meant we ordered custom impact-rated doors from a fabricator who matched the muntin profile exactly, then replaced the undersized framing and installed new stainless hardware and flashing before the Landmarks Preservation Commission inspector signed off. No stop-work order. No surprise.

Bifold & Folding Doors
Bifold and folding door installation in Palm Beach typically falls between $3,000 and $9,500, with higher-end aluminum or impact-rated systems landing above that. These are popular on newer waterfront builds and renovations where the owner wants the threshold to disappear between the living space and a patio facing the Intracoastal. The dual salt-air exposure demands careful attention to track drainage, stainless rollers, and weep-hole placement so the track doesn’t turn into a corrosion bed inside two seasons.

Pivot Doors
Pivot door installation runs $5,000 to $12,000 or more in Palm Beach depending on size, material, and whether the door is on a custom home or a newer spec build along the North End. These doors are heavy, often eight feet tall or better, and they rely on top and bottom pivot hardware precisely aligned. Anchoring into the floor slab and header of an older home means verifying the framing first. An undersized header will deflect under the weight, and that deflection shows up as a door that binds and a slab that takes wind water over time. We check all of it before we order the door.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. In Palm Beach we also work with specialty fabricators who produce CWS, ES Windows units built to replicate historic muntin profiles and true divided-light patterns. We keep accelerated parts access for Palm Beach customers through our South Florida network, which means hardware replacements and warranty callbacks don’t wait on a shipment from the Midwest. When a French door hinge fails on a coral-stone estate on Australian Avenue, we can usually have the correct replacement part in hand within days, not weeks.
Common Door Installation Problems We See in Palm Beach Homes
Palm Beach doors fail differently than doors in West Palm Beach, Greenacres, or Palm Beach Gardens. Opening up an older home here turns up the same four issues more than anything else:
- Corroded multi-point lock hardware and hinges from dual salt-air exposure. The Atlantic drives salt spray across the island while the Intracoastal adds reflected moisture from the west, so door hardware corrodes faster here than anywhere else in the county. Lock cylinders seize, hinge pins snap, and multi-point systems lose the engagement that holds a door against wind-load pressure. When we open a Palm Beach door, we expect to find stainless replacement hardware going in.
- Undersized or termite-damaged framing hidden behind old door units. Homes built in the 1920s through 1940s used dimensional lumber that often does not meet current Florida Building Code for header spans. Termite damage from years of ground contact and humid air makes it worse. Once the casing comes off and the opening is exposed, the framing inspection often triggers a structural upgrade and a permit revision. We write allowances into the contract for exactly this situation.
- Off-the-shelf impact doors on historic properties trigger stop-work orders. The Landmarks Preservation Commission requires designated properties to match original divided-light patterns, muntin profiles, and exterior paint colors. A contractor who shows up with a standard impact casement gets stopped before the first screw goes in. We maintain relationships with custom fabricators who build code-compliant, historically sympathetic units and we shepherd the dual permit and landmark approval process ourselves.
- Failed flashing and waterproofing at the threshold. Palm Beach gets some of the heaviest short-duration rain in South Florida, and a door with missing or deteriorated flashing tape channels that water straight into the subfloor and framing. By the time a homeowner notices the door binding or a musty smell near the jamb, the damage is usually well underway. We replace the flashing as standard on every door we touch here, whether the quote needs it or not.
Pricing for Door Installation in Palm Beach, FL
Here’s what actual Palm Beach door jobs cost, based on the work we’ve done across the island:
- Standard entry door replacement: $850 to $2,900
- Impact-rated entry door: $1,800 to $4,200
- Double French door (standard): $2,200 to $5,800
- Double French door (impact-rated, custom arch): $4,500 to $9,800
- Bifold or folding door system: $3,000 to $9,500
- Pivot door (custom): $5,000 to $12,000+
- Storm door: $500 to $1,600
What moves the number: whether the property is landmark-designated, whether the opening needs reframing, whether the existing surround requires custom fabrication, and whether you select standard, impact-rated, or historically accurate divided-light glazing. We quote line items in writing, including permit costs and the Palm Beach-specific work involved. Call (386) 251-6745 for a free estimate on your specific door.
We Also Serve Cities Near Palm Beach
TruePane handles Door Installation in Palm Beach and across the bridge and up the coast. Our crews cover West Palm Beach, Greenacres, Palm Beach Gardens, and Royal Palm Beach with the same written quotes and the same Done Right Promise. If you’re just across the Intracoastal Waterway or further up Florida’s Turnpike corridor, the phone line is the same: (386) 251-6745.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Beach
Yes. If your property is designated historic or contributing to a landmark district, exterior door replacement requires Landmarks Preservation Commission review before work begins. The commission will require that new doors replicate original divided-light patterns, muntin profiles, and exterior colors. We handle that approval process as part of the job, working with fabricators who build code-compliant units that pass landmark review. Call (386) 251-6745 and we will check your property status and get the paperwork moving.
Palm Beach sits on a narrow barrier island with the Atlantic Ocean on one side and the Intracoastal Waterway on the other. Salt spray reaches the island from both directions, which means aluminum frames, multi-point lock hardware, and steel fasteners corrode noticeably faster than at mainland addresses just a few miles west. We specify stainless hardware, properly flashed thresholds, and marine-grade finishes as standard on island jobs. Call (386) 251-6745 and we’ll explain what that means for your specific doors.
We plan for them in writing before the job starts. Any Palm Beach home built in the 1920s through 1940s likely has framing that does not meet current Florida Building Code for wind loads, and replacing an old door will expose that once the opening is cut back. Our contracts include inspection allowances and written approval for any structural upgrade before we touch it. You approve the price in writing first. That’s the square deal, and it keeps a $2,500 door replacement from becoming a $6,000 surprise.
Yes, and we’ve done it. Arched openings with coral-stone surrounds require custom-fabricated doors built to the exact radius and divided-light pattern, not off-the-shelf units. We measure every opening twice, order from fabricators who reproduce the muntin profile and color, and install without touching the surround. On a landmark-designated estate, that also means Landmarks Preservation Commission sign-off before we finish. Call (386) 251-6745 for a free estimate on your opening.
Fogged glass means the thermal seal has failed and the insulating gas between the panes has escaped. The glass will never clear on its own. In Palm Beach, failed seals also let in salt-laden humid air, which accelerates corrosion on the internal spacer and shortens the life of the frame. We replace the insulated glass units and re-register the warranty so the new seal is covered in writing. The estimate is free at (386) 251-6745.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After