Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Palm Springs
Door installation in Palm Springs, FL means working on a village full of 1960s and 70s concrete block ranch homes, and the work rarely looks like a simple swap. The jalousie back door on a Lakewood Road house, an original aluminum slider off Congress Avenue, a front entry that’s been binding since the summer rains started: these are the jobs our crews see every week. We’ve been serving Door Installation in Palm Springs long enough to know that the real cost of the work is in the access, the stucco, and the permit sequence, not just the door itself. Call (386) 251-6745 and a live person answers, same as it’s always been.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Door Installation Company
Palm Springs homeowners tend to keep their houses for decades. That means we meet people who remember the original install, the contractor who came back twice, and the fogged seal nobody would stand behind. Our crews go into those homes wearing uniforms, background-checked, and we measure every opening twice because a quarter-inch difference in a 1962 CBS wall is the difference between a door that closes square and one that binds by August.
We’re not a franchise. TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler, and the standing rule on the whiteboard hasn’t changed: if the pane is not true, the job is not done. When a Palm Springs customer calls, dispatch gets routed from our South FL office and a local crew heads to the village. The estimate we hand you is line-itemed on paper, the manufacturer lines are quoted side by side, and both warranty layers get registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every door we set in Palm Springs.
Reviews from Palm Springs homeowners mention the same things: punctual arrival, a clean jobsite when the crew leaves, and a phone number that still rings a live person. We sponsor county fairs and church roof funds because we plan to be answering that phone in thirty years.
Our Door Installation Services in Palm Springs
Our Door Installation team handles the full range of residential doors in Palm Springs, and we approach each job based on the house, not the catalog. In this village, the houses tell you what they need.
Entry & Swing Doors
Most Palm Springs ranch homes have a front entry that’s seen fifty-plus years of afternoon sun and hurricane-season humidity. We replace those with impact-rated entry doors sized to the actual rough opening, not the closest stock unit. If the frame is out of square, which it often is in CBS construction, we correct it before hanging the new door so the deadbolt throws cleanly and the weatherstripping meets the jamb evenly. A well-set entry door in Palm Springs should not whistle during a summer thunderstorm.
Storm Doors
A storm door on a Palm Springs home does double duty: extra protection for the primary entry and a screened opening for the months when you want cross-ventilation without letting the no-see-ums in. We install storm doors that fit the existing masonry openings on these older ranches, and we tell you honestly when the primary door behind it is too far gone to keep. No point putting a $400 storm door over a door that’s already swelled and binding.
Arched & Custom Doors
This village has its share of radius-top openings and non-standard frame sizes from the original build era. If your front entry is arched or your side door is an odd width, we order the custom unit and set it to the existing reveal rather than framing down the opening and losing the character. Custom sizing matters in Palm Springs because the concrete block doesn’t move, but the door has to match it exactly.
Bifold & Folding Doors
Bifold and folding door systems are increasingly popular on Palm Springs homes where a patio was enclosed decades ago and the owner wants to open the back wall again. These installations demand precise header work and floor track alignment, especially on an older CBS structure where the slab isn’t perfectly level. We level the track before anything else, because a folding door that drags on one side is a door you’ll cuss at every afternoon you try to roll it open.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Palm Springs homeowners looking at impact-rated options, we often quote CWS, ES Windows, and ECO Window Systems side by side so you see the differences in writing: glass package, frame construction, design pressure rating, and warranty terms. We don’t steer you to one brand. We show you the numbers and let the door make its case.
Common Door Installation Problems We See in Palm Springs Homes
- Jalousie-to-impact door conversions that crack the block. The original jalousie frame on a 1960s CBS wall is set into the stucco. Yank it out without scoring the reveal first and you get hairline cracks that wick water behind the new jamb. We score first, every time.
- Off-the-shelf impact doors jammed into non-standard 1960s openings. A door that doesn’t fill the rough opening properly will fail wind-borne debris inspection and leak during a Palm Springs afternoon storm. We order custom or special-order units when the opening calls for it.
- Unpainted stucco after a jalousie conversion. Leave raw masonry exposed around the new frame and the first wet season brings water intrusion and caulk failure. We budget for stucco patching and repainting as part of the job, not a surprise add-on at the end.
- Fogged insulated glass in sliding doors only a few years old. Palm Springs’s UV load and humidity accelerate seal failure on cheap insulated glass. When we see fog between panes, we check the original warranty registration first. If it was never registered, that’s a conversation about who did the install.
Pricing for Door Installation in Palm Springs, FL
A single impact-rated entry door in Palm Springs, including tear-out of the old unit, stucco scoring, new flashing, and stucco patching, typically lands between $2,800 and $6,500 depending on the door line and the frame condition. A jalousie-to-impact conversion on a rear door runs $3,200 to $7,000 because the stucco work and custom sizing add real labor. A standard storm door installation is $900 to $1,800 including the door and hardware. Custom arched or radius-top doors start higher because the unit is special-ordered and the reveal work is slower.
What moves the price: whether your opening is standard or custom, whether the existing jamb is salvageable or rotted, stucco repair scope, and whether your property has a tight side yard that forces longer material staging. We give you a written, line-itemed quote before any work starts, and the price on that quote is the price you pay. The Done Right Promise covers the workmanship with no fine print and no arguing. Call (386) 251-6745 for a free estimate.
We Also Serve Cities Near Palm Springs
TruePane crews serve Palm Springs plus the surrounding communities of Royal Palm Beach, Loxahatchee Groves, Westlake, and Westgate. If you live in one of those areas and need door installation, the same crew, the same warranty registration, and the same live-person phone line apply. Call us and we’ll schedule a time to measure.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Springs
Yes, exterior door replacement in Palm Springs requires a permit through the village, and yes, the replacement opening must meet Palm Beach County’s wind-borne debris requirements. That means impact-rated glazing or a protected opening. We pull the permit, schedule the inspection, and handle the paperwork. Call (386) 251-6745 and we’ll tell you what your specific opening requires before you spend a dollar.
Jalousie doors on old Palm Springs CBS homes cannot be made code-compliant. Insurance carriers are actively non-renewing policies on homes with original jalousie or single-pane openings, so replacement is the path to keeping your coverage. We remove the old frame carefully, score the stucco, set an impact-rated unit, and patch the reveal. Call (386) 251-6745 for a free estimate and we’ll walk you through the code and insurance picture.
We stage materials on the street or in the driveway, and when a neighbor’s swale is the only option, we get written permission first. Tight lots mean more walking, not cutting corners. We plan the staging before the quote so the access cost is baked into the number you see on paper, not added later.
Yes. Removing a jalousie frame from a CBS wall exposes the stucco reveal, and after we patch it, the new stucco will need paint to match your exterior. We include stucco patching in the quote, and we can handle repainting as part of the scope. If that’s left undone, the raw patch will fail within one wet season. Call (386) 251-6745 if you want a straight answer on your specific wall.
Fog between panes means the insulated glass seal has failed. Whether it’s covered depends on the manufacturer’s warranty and whether it was registered in writing at install. If it was never registered, the manufacturer will deny the claim. This is exactly why we register both warranty layers before the truck leaves the driveway. Call (386) 251-6745 and we’ll look up your paperwork and tell you where you stand.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.