Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Riviera Beach
Door installation in Riviera Beach comes with a specific set of challenges most companies never mention until the old unit is already out of the wall. Between the salt air working on frames from two directions, the 1950s and 1960s concrete block openings that were never framed to current code, and Palm Beach County’s mandatory hurricane-impact requirements, a simple door swap here can turn into a structural project if the crew doesn’t know what they’re looking at before they start. We do. TruePane has been opening up Riviera Beach homes long enough to know what’s behind the jamb, and we write it into the quote before the first screw comes out. Call (386) 251-6745 to schedule a free estimate.
Why TruePane Windows & Doors Is Riviera Beach’s Preferred Door Installation Company
Our Door Installation team works on Riviera Beach homes every week, from the mainland grid streets off Blue Heron Boulevard to the condominium towers on Singer Island. That matters because door work here isn’t interchangeable with door work in Wellington or Royal Palm Beach. The corrosion profile is different. The framing underneath is different. The permit triggers are different. A crew that treats Riviera Beach like any other Palm Beach County city is going to miss something, and the homeowner is the one who pays for it later.
We’re led by Dale Kessler, a second-generation glazier who started TruePane in 2008 because he kept seeing the same failure: installs that were out of true, warranties that were never registered, and homeowners left holding a fogged seal and a door that binds. The fix wasn’t complicated. Measure every opening twice. Quote the manufacturer lines side by side on paper. Register both warranty layers before the truck leaves the driveway. Stand behind the work for 90 days with no paperwork fights. That’s the Keystone Standard, and it applies to every door we hang in Riviera Beach.
One more thing worth knowing. When you call TruePane about door installation in Riviera Beach, a live person answers. Not a voicemail tree, not a callback form, not a regional call center. That’s true at noon and at midnight, because a door that won’t latch on an Intracoastal-facing house is a security problem that can’t wait for business hours.
Our Door Installation Services in Riviera Beach
We handle the full range of Door Installation in Riviera Beach work, but three services come up more than anything else in this city. Here’s what we see most, and what each one actually involves here.
Entry & Swing Doors
The front doors on Riviera Beach’s 1950s and 1960s CBS homes are almost always original, usually steel or hollow wood, and typically installed in an opening that was never flashed correctly. Salt air gets in behind the jamb, the threshold screws corrode, and the door starts dragging on the strike plate by year seven or eight. We replace the door and the frame as a unit, install new flashing tape, and set the threshold so it sheds water away from the slab instead of under it.
Double & French Doors
French doors on the mainland side of Riviera Beach take salt spray from the Lagoon, and on Singer Island they take it from the Atlantic. Either way, the bottom rails and hinge hardware get hit hard. When we install French doors here, we use marine-grade hardware and impact-rated glass as the default, because the alternative is a five-to-seven-year replacement cycle. You shouldn’t have to buy the same door twice.
Storm Doors
A storm door in Riviera Beach isn’t a cosmetic add-on. It’s the sacrificial layer that keeps wind-driven rain and salt spray off your primary entry door. The catch is that a cheap storm door installed on an out-of-square 1960s opening will bind within a season. We measure the reveal on all four sides, shim the frame true, and set the closer so it doesn’t slam in the crosswinds off the Intracoastal.
Pivot Doors
Some of the newer and remodeled homes along the Riviera Beach mainland have transitioned to pivot doors, especially on ocean-view and lagoon-facing elevations. They’re beautiful, but a pivot door on a concrete block wall needs precise head and floor hardware alignment, and the salt air here is unforgiving to exposed pivot hinges. We set pivot doors with sealed bearing hardware and check the swing clearance twice before the slab is finished.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Riviera Beach
We’re an authorized installer for more than a dozen manufacturer lines, and for Riviera Beach customers we most often quote PGT and CGI impact-rated doors because of the coastal wind speeds this zone demands. We also install Andersen and Pella when the homeowner wants a specific wood or composite look. Here’s the practical benefit: when we quote your door, we put the manufacturer lines side by side on paper with their warranties listed in writing, so you can see exactly what you’re buying and what it’s covered for before you write a check. No vague assurances. No unregistered warranty cards.
Common Door Installation Problems We See in Riviera Beach Homes
When we pull an old door out of a Riviera Beach house, we usually know what we’re going to find before we find it. Here are the four things that show up most often:
- Corroded bottom tracks and hinge screws. Salt spray from the Atlantic and the Lake Worth Lagoon works on aluminum and steel hardware from both directions, binding doors and stripping screw threads within five to seven years. A door that drags is usually not a hinge adjustment problem; it’s a metallurgical problem.
- Rotted wood shims in CBS door openings. Many of the original door frames in Riviera Beach’s concrete block homes were shimmed with untreated lumber, and after decades of salt-driven moisture that lumber crumbles. When we pull the old frame, we often have to reframe the opening properly before the new unit goes in.
- Out-of-square openings on Singer Island condos. Wind uplift and racking on oversized sliding door walls gradually pull the openings out of square, which means a standard replacement unit won’t sit right without custom shimming or header reinforcement. A quote that ignores this is a quote that will grow once the work starts.
- Permit-triggered code upgrades nobody mentioned. Palm Beach County requires impact-rated glazing on any permitted door or window replacement in this wind zone, and once the opening is exposed, inspectors often flag outdated wiring or structural issues adjacent to the opening. A contractor who doesn’t tell you that upfront is setting you up for a surprise.
Pricing for Door Installation in Riviera Beach, FL
Door installation in Riviera Beach runs higher than inland Palm Beach County, and there’s a reason: impact-rated glass and marine-grade hardware aren’t optional here, and the framing corrections on older CBS homes are frequent. A standard single entry door replacement, impact-rated, typically runs $1,800 to $3,400 depending on the product line and whether the opening needs reframing. French doors run $3,500 to $7,500 for an impact-rated pair, installed. A full-frame replacement on a corroded 1960s slider on an Intracoastal-facing wall can run $4,000 to $9,000, and that’s before any structural work like header repair or sill pan replacement. We write every allowance into the quote, price any surprise in writing before we touch it, and we don’t change the number once work starts unless you approved it. Call (386) 251-6745 for a free line-item estimate. Estimates are free, and the written quote is yours to keep either way.
We Also Serve Cities Near Riviera Beach
Beyond Riviera Beach itself, our crews regularly handle door installation in Royal Palm Beach, Loxahatchee Groves, Westlake, and Westgate. If you’re in one of those communities and dealing with the same salt-air corrosion, out-of-square openings, or permit-triggered upgrades we see in Riviera Beach, call the same number and we’ll schedule a walkthrough. The estimate is free, and the quote is in writing.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Riviera Beach
The sticking is almost always corrosion in the bottom track and rollers from salt spray off the Lake Worth Lagoon, which hits Intracoastal-facing homes far harder than homes set back from the water. The rollers pit, the track delaminates, and the door binds. The fix is a track and roller replacement if caught early, or a full door replacement if the frame itself has started to corrode through. Call (386) 251-6745 and we’ll inspect it and tell you which one you’re looking at.
Often yes. Many of those original openings were shimmed with untreated wood and never flashed, so once the old frame is out, we typically find rotted shims, crumbled mortar, or an opening that’s no longer square. We factor the reframing and flashing work into the quote before we start, so the number you approve is the number you pay. Nothing gets discovered on the fly.
It can, and this is an area where we flag the obligation clearly. Palm Beach County’s coastal wind zone rules apply to any permitted opening replacement, and on a Singer Island condo the association may require all openings on that elevation to meet a uniform impact standard. We’ll work with your association’s requirements, and if a review is triggered, we’ll tell you before any work begins, not after the permit is filed.
Rotted wood shims and corroded sill pans. The original installers frequently used untreated lumber to shim the frame into the concrete block opening, and forty or fifty years of salt-driven moisture turns that lumber to pulp. We remove all of it, reframe with pressure-treated or composite material, install flashing tape, and pour a new sill pan that sheds water away from the house. It’s the part of the job you’ll never see, but it’s the part that determines whether the new door lasts ten years or thirty.
Fogging between the panes means the seal has failed and moisture has gotten into the insulated glass unit. In Riviera Beach, the bidirectional salt exposure accelerates seal degradation on low-quality units, especially on lagoon-facing elevations. If the manufacturer’s warranty is still active and registered, we handle the claim and replacement. If it was never registered, that’s a different conversation, and one of the reasons we register both warranty layers in writing on every install before the truck leaves the driveway. Call (386) 251-6745 for an assessment.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Riviera Beach and surrounding communities with door installation, window replacement, and impact-rated glazing.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.