Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Window Installation for Royal Palm Beach Homeowners
Window installation in Royal Palm Beach costs between $450 and $1,850 per window for most residential openings, with full-home replacements typically running $8,500 to $35,000 depending on glass type, frame material, and whether you need impact-rated units. A standard single-hung in a newer Royal Palm Beach home usually lands near the lower end; a PGT impact casement with Low-E glass and a Miami-Dade NOA runs near the top. You’ll get written, line-item pricing before any work starts, and a live person answers when you call (386) 251-6745.
We’ve been setting windows in Palm Beach County since 2008, and Dale Kessler founded TruePane in 2008 because he kept seeing the same two problems on other crews’ jobs: out-of-true frames and warranty paperwork that never got filed. Our answer to both is the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. If the pane is not true, the job is not done. That sentence has been on the whiteboard since day one, and it still governs every install we do in Royal Palm Beach.
Key Takeaways
- Most window installs in Royal Palm Beach run $450-$1,850 per opening; full homes run $8,500-$35,000.
- TruePane has served this community since 2008 under second-generation glazier Dale Kessler.
- Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before we leave.
- A live person answers our phone 24/7, and estimates are always free with no change-order surprises.
- We’re authorized installers for, PGT, CGI, and more than a dozen other manufacturer lines.
What Our Window Installation Service Includes
Every window we install in Royal Palm Beach gets the same baseline treatment: the opening is measured twice, the reveal is checked with a level, the frame is shimmed true before fastening, and the flashing is lapped so water always drains down and out. The specifics change with each style. Here’s how we handle each one.
Casement Windows
Casement windows are hinged on one side and crank outward, which makes them the tightest-sealing operating windows you can buy. In Royal Palm Beach, where afternoon thunderstorms blow sideways off the Everglades, that compression seal matters: a properly set casement closes against the frame instead of sliding past it, so driven rain stays outside where it belongs. We install casements with factory-applied Low-E glass and stainless steel hinges, and we check the crank mechanism twice before we call the job done. If you want a bedroom window that actually keeps humidity out in August, this is the one we point to first.
Awning Windows
Awning windows hinge at the top and swing outward from the bottom, which lets you leave them open during a light rain without water coming in. They’re a common pick over kitchen sinks and in bathrooms where coastal building codes sometimes require tempered glass and a higher sill. TruePane sets awning windows with the same attention to reveal and plumb as every other unit, because a top-hinged sash that’s even slightly out of true binds against the frame within a season. We also make sure the operator arms are rated for full-size sashes before the window ever goes in.
Fixed & Picture Windows
A fixed or picture window doesn’t open. It’s there for light and view, and in Royal Palm Beach, that usually means a wide opening facing a lake, a preserve, or a golf course. The install matters more than people think: a large fixed unit that’s racked even an eighth of an inch puts constant stress on the seal, and a failed seal in a picture window is exactly the kind of fogged-glass disappointment our customers remember from the last company they hired. We bed large fixed units properly, level them on all four planes, and make sure the frame carries the glass weight instead of the glass carrying the frame.
Single & Double Hung
Single-hung and double-hung are the most common window styles in Royal Palm Beach, found in everything from 1980s ranch homes in the Village of Royal Palm neighborhood to newer construction around Madison Green. A single-hung has a fixed top sash and an operable bottom sash; a double-hung lets both sashes move, which helps with cross-ventilation and makes cleaning the second-story glass a one-person job. We set hung windows so the sashes travel smoothly without play, because a hung window that rattles in the track or won’t stay up is the fastest way to turn a new install into a complaint.
Sliding Windows
Sliding windows run along a horizontal track, and in South Florida they fail for one main reason: the track wasn’t set level, so the sash fights the operator every time it moves. We see older sliders in Royal Palm Beach where the track is worn through from years of that fight, and the homeowner has been living with a window that needs both hands and a shoulder to open. A TruePane slider install starts with leveling the sill, then setting the rollers to match the weight of the sash. The window should glide with one hand.
Bay & Bow Windows
Bay and bow windows project outward from the wall, and they bring their own structural questions to the job: the headboard carries roof load, the seat board needs support, and the entire unit rests on brackets that have to hit framing, not just sheathing. These are the installs where you find out whether a company knows what it’s doing, because a sagging bay window pulls the drywall with it. TruePane has set bay and bow units in Royal Palm Beach, Wellington, and West Palm Beach homes for decades, and we treat the rough framing and load path as seriously as the glass itself.
Garden & Basement Windows
Garden windows are the small greenhouse-style boxes that go over the kitchen sink, and they’re a good fit for Royal Palm Beach homeowners who grow herbs year-round. The tricky part is keeping moisture from condensing inside the unit, which comes down to how the window is flashed and sealed against the exterior wall. We install garden windows with a continuous sill pan underneath, lapped flashing at the head, and sealant detail around the entire perimeter. For homes on slab in Royal Palm Beach, basement windows are rare, but where they exist, we replace them with clear openings that meet current egress sizing so the bedroom stays a safe, legal bedroom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
We’re authorized installers for lines, and we’ve set enough of both to know exactly how each system wants to be fastened, flashed, and trimmed. Andersen’s 400 Series, for example, has an installation flange that’s designed to be nailed through specific slots at specific intervals, and the reveal around the frame is part of the water-management system. Pella’s Impervia line is a fiberglass frame with a different thermal-expansion rate than the stucco it’s going into, so the sealant joints have to be sized to move. These are the details that separate a clean install from one that leaks in three years.
We also carry and install ECO Window Systems for homeowners who want a hurricane-rated impact window at a mid-range price point. ECO builds a solid product, and we stand behind our installs of it the same as everything else. Whether you have an ECO, Andersen, Pella, or any other make in your Royal Palm Beach home, we’ll quote it side by side on paper so you can see exactly what you’re buying. No brand gets special pleading from us, and no brand gets blamed for a bad install.
Signs You Need Window Installation Right Now
- Condensation or fog between the panes. That cloudiness means the insulated glass unit has lost its seal, and no amount of cleaning fixes it. The glass is dead, and the window has stopped doing its thermal job. You’ll feel it in the electric bill and see it every time the sun hits the pane.
- You can feel air moving around the window on a breezy day. Close the window and run your hand along the frame. If you feel air, the weatherstripping has compressed past usefulness or the frame is no longer sitting flat in the opening. Both are install problems, not age problems, and both get worse as the frame racks further out of true.
- The sash sticks, binds, or falls when you let go. A window that won’t stay open is a broken balance system, and a window that needs both hands to close is fighting its own frame. In Royal Palm Beach, the humidity makes wood frames swell and aluminum oxidize, so a binding window in July is usually a sign the unit needs replacing, not lubricating.
- You can see daylight through the frame at the corners. Light gaps mean air gaps, and air gaps mean water gaps. Any window showing daylight at the corner has a failed seal between the frame and the rough opening. That’s the kind of leak that rots sheathing quietly until the stucco starts staining.
- Outside noise comes through too clearly. Single-pane or old builder’s-grade windows do almost nothing for sound. If you can hear lawn equipment two streets over in La Mancha, upgraded double-pane or laminated impact glass will change the room. We install laminate-impact units specifically for homeowners who want the glass to shut the outside off.
Our Window Installation Process - Step by Step
- 1
Measure and assess. We come out and measure every opening twice, check the condition of the existing frames, and look at what’s behind the drywall before we quote. We also ask how the windows are behaving now, because that tells us what the old installer got wrong and what we need to correct. Then we give you a written quote with line items and manufacturer options side by side.
- 2
Product selection and ordering. Once you’ve picked the line and the glass package, we order from the manufacturer and tell you the lead time in writing. For Royal Palm Beach homes in a wind-borne debris zone, we confirm the product carries the right NOA or Florida Product Approval for the elevation before we order. No surprises on the day of install.
- 3
Protection and prep. Our crews are background-checked and uniformed, and they lay drop cloths, mask off the work area, and remove the old units carefully. We don’t tear out the interior drywall return unless the new window is a different depth, and when it is, we tell you before we start so the cost for paint and repair is already in the quote.
- 4
Set, level, flash, and seal. The new window goes into the opening, gets shimmed true on all four planes, and gets fastened to the framing, not just the sheathing. Then we flash the sill, jambs, and head with weatherproofing lapped to shed water exactly like a roof. The sealant goes on last, and it goes on neat, not caulked over shims and gaps.
- 5
Warranty registration and walkthrough. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing with their durations stated. We walk the job with you, show you how the windows operate, and answer any question you want to ask. Then we leave the work area clean and tell you when to expect a follow-up call.
How Much Does Window Installation Cost in Royal Palm Beach?
A typical window installation in Royal Palm Beach runs $450 to $1,850 per opening, and the spread comes down to a few factors: the frame material (vinyl costs less than aluminum or wood-clad), the glass package (clear double-pane is the price floor; impact-rated Low-E is the ceiling), and the size and shape of the opening. A standard 36-inch-by-60-inch single-hung in vinyl usually lands between $500 and $900 installed. A PGT or Andersen impact casement with laminated glass can run $1,400 to $2,800 per unit depending on what the elevation requires.
What affects the price: whether the opening needs new construction flanges or a retrofit frame that fits inside the existing track, whether the house is stucco over frame or concrete block (block takes different fasteners and more labor), whether the window is on the first or second story, and whether you’re upgrading from single-pane to impact-rated glass that needs stronger frame returns. The best way to avoid overpaying is to get a written, line-item quote and compare apples to apples. Our free estimate includes every fastener, sealant, and piece of flashing in the price so you’ll never see a change order for “materials adjustments.”
Window Installation Near Royal Palm Beach - Our Service Area
We install windows throughout Royal Palm Beach and the surrounding communities: Loxahatchee Groves, Westlake, Westgate, Palm Springs, Wellington, West Palm Beach, Greenacres, Atlantis, and points east toward the coast. Our crews live in these towns, and we’ve worked in every HOA along Southern Boulevard and Okeechobee for decades. If you’re looking for Window Installation in Loxahatchee Groves, we’ll be there with the same Keystone Standard and the same live person answering the phone. For homeowners west of Royal Palm Beach, see our Window Installation in Westlake page. Our home page has the full picture of our service area and what we do.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Royal Palm Beach
Window installation is the process of setting a new window unit into an opening, fastening it to the framing, and sealing it against air and water. In Royal Palm Beach, it also means dealing with Florida wind-load requirements, hurricane-protection codes on certain elevations, and stucco or concrete-block rough openings. A proper install includes leveling the frame, shimming it true, flashing it to shed water, and registering the manufacturer’s warranty. TruePane has done it this way since 2008.
Most single-window installations in Royal Palm Beach are completed in one day, and full-home replacements typically take two to four days depending on how many openings and what the existing frames look like. We tell you the schedule up front and stick to it. If we find hidden framing damage behind the old window, we’ll stop, show you what we found, and give you a written cost to fix it before we continue.
Window installation in Royal Palm Beach runs $450 to $1,850 per window for most residential units, with full-home projects ranging from $8,500 to $35,000. The exact price depends on the window style, frame material, glass package, and whether impact ratings are required. Call (386) 251-6745 for a free written estimate that line-items every cost so you can compare it honestly against any other quote.
Yes, TruePane is an authorized installer for both, and we’ve installed enough of each line to know their fastening patterns, flashing details, and warranty requirements cold. We also install ECO Window Systems, PGT, Marvin, Milgard, CGI, and Jeld-Wen. Whatever product line is in your house, we’ll quote it accurately and register the warranty in writing before we leave the job.
If a window is broken, boarded, or letting water into your Royal Palm Beach home, call (386) 251-6745 any hour of the day or night. A live person answers the phone, not a voicemail tree, and we’ll get you on the schedule and give you a straight answer about when we can be there. For storm-damaged openings, we’ll secure the window now and complete the permanent install as soon as the replacement unit arrives.
Every TruePane window installation carries the Done Right Promise: if it’s not done right, we make it right, no paperwork fights and no arguing. On top of that, the Keystone Standard means both manufacturer warranty layers are registered in writing with their durations stated before our truck leaves your driveway. The workmanship is guaranteed, the product is guaranteed, and the registration is documented so you never have to chase a claim.
Clear the area around each window about six feet back, remove window treatments if you’re keeping them, and take anything off the walls near the openings that could vibrate off during the work. We’ll lay drop cloths and protect the floors, but moving small furniture yourself helps us get in and out faster. If you have pets, a closed room or the garage keeps them out of the work area. Everything else, we handle.
Schedule Your Window Installation Service in Royal Palm Beach Today
The estimate is free, the pricing is line-item, and the warranty gets registered in writing before we pull out of your driveway. Call (386) 251-6745 and you’ll reach a live person regardless of the hour. We’ll measure your openings, walk you through your options side by side on paper, and give you a number that won’t change once the work starts. Dale Kessler built TruePane on a simple rule: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Royal Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.