Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Palm Beach Shores
Impact windows and doors in Palm Beach Shores run $1,150-$2,600 per opening for standard-size coastal-spec units, installed. That’s the honest range we quote most weeks here on Singer Island. You didn’t land on this page by accident – you’re looking at a water view in both directions and wondering if your windows will hold when a real storm pushes off the Atlantic. They will, if they’re spec’d for what Palm Beach Shores throws at them. Call (386) 251-6745 and we’ll put numbers on paper for your exact openings. No guesswork, no back-of-the-napkin math.
Why Palm Beach Shores Homes Need a Different Window Spec
Most coastal towns deal with salt from one direction. Palm Beach Shores isn’t most coastal towns. The town sits on the southern tip of Singer Island, a strip of land so narrow that the Atlantic Ocean sits within shouting distance of the Intracoastal Waterway on the other side. Every home on the island – every single one – gets salt-laden air moving across it from both directions. West-facing windows along Lake Worth Lagoon take the same corrosive beating as oceanfront glass three streets east. We’ve watched aluminum frames pit and seize on west-facing walls that never see a wave.
That dual-water exposure is the difference between a window that lasts 20 years and one that fails in seven. Not because the glass breaks. Because the hardware gives out. Aluminum frame oxidation, weep-hole covers crumbling into white powder, stainless-steel-adjacent rollers grinding to a halt. We specify marine-grade components on both sides of the house in Palm Beach Shores, not just the beachfront side. A window that saves you $400 per opening by cheaping out on hardware will cost you $900 per opening to replace within a decade. You pay once now, or you pay twice later.
We replaced the original 1960s jalousie windows on a mid-century home on Inlet Way, just a block from the Intracoastal, after the aluminum frames had oxidized so badly the sashes seized in their jambs. The west-facing windows showed the same salt pitting and weeping seal failure we see on oceanfront properties three streets east – the Atlantic breeze carries spray clear across the island. We installed fusion-welded impact-rated glazing with stainless steel hardware and marine-grade flashing tape, and added argon-filled low-E insulated glass units to replace the single-pane originals. The homeowner now has code-compliant protection and no longer fights fogged panes within two seasons.
How Much Do Impact Windows & Doors Cost in Palm Beach Shores?
You’ll see a lot of vague pricing talk from window companies. That’s because they want the appointment before they tell you the number. We’ll give you the range right here. A typical Impact Windows & Doors job in Palm Beach Shores falls into these brackets based on what we’ve actually quoted and installed on Singer Island:
- Hurricane impact windows (coastal-spec, small to mid-size): $1,150-$1,850 per opening, installed
- Hurricane impact windows (larger openings, second-floor): $1,800-$2,600 per opening, installed
- Impact sliding glass doors (standard 8-foot): $4,200-$6,800, installed
- Impact entry or French doors: $3,800-$6,200, installed
- Impact garage doors (single bay, reinforced track): $2,900-$4,600, installed
What moves the number: opening size, frame material, which brand you choose, and whether the existing frame needs a full buck-and-replace or just an insert. Older Palm Beach Shores homes with single-pane jalousies almost always need a complete frame replacement, which runs toward the higher end. We write line-item quotes so you see exactly what you’re paying for, and we don’t add surprise charges once the job starts. The free estimate is just that. Call (386) 251-6745 and we’ll walk the property and give you a number on paper before we leave.
Our Impact Windows & Doors Services in Palm Beach Shores
Hurricane Impact Windows
The core of what we do in Palm Beach Shores. These houses were mostly built between 1955 and 1975, and many still carry their original jalousie windows or single-pane aluminum frames. Neither survives a direct hit, and neither meets current Florida Building Code for coastal high-velocity wind zones. We spec impact windows with fusion-welded frames, stainless steel or hot-dip galvanized hardware, and laminated glass rated for Large Missile Impact. That’s not optional here. On a barrier island with no windbreak between you and the open Atlantic, the window is your first line of defense.

Impact Sliding Glass Doors
Sliders in Palm Beach Shores face a specific enemy: salt in the track. Cheap rollers and non-marine tracks corrode within a few seasons, and the door starts binding in July. We install impact-rated sliders with stainless steel rollers and marine-grade frame coatings, then set them so the door glides with one hand even when the humidity sits at 90 percent. If you’re replacing a slider that faces the Intracoastal in a neighborhood like Inlet Cay or along Blue Heron Drive, the hardware spec matters as much as the glass rating. We quote both side by side on paper so you see the difference.

Impact Entry & French Doors
Front doors in Palm Beach Shores take salt spray head-on, and a cheap entry door with standard hinges will let you know within three years. Pitting on the frame, rust at the threshold, a deadbolt that fights back. We install impact-rated entry and French door systems with stainless steel hinges, marine-grade weatherstripping, and threshold caps that won’t corrode. The door locks, seals, and closes dead true – and it stays that way because the hardware is rated for the environment you actually live in.

Impact Garage Doors
Garage doors in Palm Beach Shores are a code issue, not just a convenience issue. A non-rated garage door becomes a liability under hurricane wind loads, and the pressure differential it creates can lift your roof. We install and brace impact-rated garage doors with reinforced track systems, and we check the door’s wind-load rating against your home’s position on the island. Homes on the highest-risk elevation zones – which is much of Singer Island – need a higher rating than the big-box door you’d find inland. We make sure your door meets the standard.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Wind Mitigation & Code Compliance in Palm Beach Shores
Palm Beach County’s coastal high-velocity wind zone rules aren’t suggestions. Palm Beach Shores sits squarely inside the zone where Florida Building Code demands impact-resistant glazing or full-shutter protection on every opening facing the water – and on this island, that’s every opening, period. A wind mitigation inspection can cut your insurance premium meaningfully, but only if the paperwork proves the windows and doors were installed to the tested standard. We pull permits, schedule inspections, and hand you the documentation your insurer actually wants. If a wind mitigation inspector finds something that doesn’t pass, it’s not because we skipped a step.
Trusted Brands We Service in Palm Beach Shores
We’re an authorized installer for more than a dozen manufacturer lines, and for Palm Beach Shores homes we lean on brands that build specifically for salt-air environments. CGI and PGT both make windows and doors engineered for coastal Florida, with stainless hardware options and marine-grade frame finishes. We also work steadily with ES Windows, CWS, and ECO Window Systems when a homeowner wants a specific aesthetic with the right coastal rating. We register both warranty layers in writing before the truck leaves the driveway – no exceptions, no post-dated paperwork. If you already have impact windows from one of these lines and something’s off – a fogged pane, a seized slider, a hinge that’s begun to pit – we service it without giving you the runaround.
Common Impact Windows & Doors Problems We See in Palm Beach Shores Homes
- Aluminum frame oxidation on both sides of the house. Most installers expect corrosion on oceanfront units and downgrade the Intracoastal side. On Singer Island, that’s a mistake. West-facing frames along the lagoon pit, swell, and seize just as fast as beachfront glass. We see the same white powder and stuck sashes on Inlet Way that we see three streets east.
- Weep-hole covers and exterior hardware crumbling within a few seasons. A weep-hole cover is a tiny stamped piece that keeps water moving out of the frame track. Cheap ones disintegrate in Palm Beach Shores salt air fast. Once they go, water pools in the track, corroding the frame from inside. We replace every hardware piece with stainless or hot-dip galvanized on every opening.
- Fog between the panes on impact windows less than a decade old. Fog means the insulated glass unit seal has failed. Moisture got between the panes because salt-laden air attacked the edge sealant. That’s not a cleaning issue, and it’s not something you can fix with a defogger kit. The unit needs replacement. In Palm Beach Shores, seal failure happens on an accelerated clock – a window that might fog at year fifteen inland can fog at year eight here.
- Sliding doors that bind in summer and won’t close flush in winter. Salt corrosion on the track and rollers, combined with heat-driven frame expansion, makes a slider that sticks in July and rattles in January. We set sliders with marine-grade rollers and shim them so they ride true through the season swing. A door that needs a shoulder to lock isn’t protecting you in a storm.
Key takeaways for Palm Beach Shores homeowners: The cheap inland-spec impact window costs more than the coastal-spec version within a decade because it fails earlier. West-facing windows need the same marine-grade hardware as oceanfront units. Fogged panes mean failed seals, not dirty glass. And a slider that binds is telling you its hardware is already corroding.
We Also Serve Cities Near Palm Beach Shores
TruePane’s Impact Windows & Doors in Palm Beach Shores team regularly works in the neighboring communities across Palm Beach County. Homeowners in Royal Palm Beach, Loxahatchee Groves, Westlake, and Westgate reach out for the same coastal-spec work we do on Singer Island, though those inland homes need a different corrosion spec than what Palm Beach Shores’s dual-waterfront exposure demands. If you’re nearby, call (386) 251-6745 and we’ll talk through your options.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Impact Windows & Doors in Palm Beach Shores
Yes. Salt-laden Atlantic breezes carry clear across Singer Island and deposit on the lagoon-side windows just as aggressively as on beachfront glass. We spec stainless steel or hot-dip galvanized hardware on every opening in Palm Beach Shores, regardless of which water body the window faces. A west-facing frame that gets inland-grade hardware will pit and seize within a few years. Call (386) 251-6745 and we’ll show you the hardware difference on paper before you decide.
The most common failure is aluminum frame oxidation so severe the sashes seize in their jambs and can’t be opened or closed by hand. Jalousie windows were already a poor seal by design; once the frames corrode in salt air, the clips and pivots crumble and the window becomes permanently stuck. We replace them with fusion-welded impact-rated fixed or casement units that actually seal and hold under wind load. The difference in air leakage alone is dramatic in these older island homes.
Fog between the panes is trapped moisture inside the insulated glass unit, which can only enter if the edge seal has breached. Salt air in Palm Beach Shores accelerates edge-seal failure because the sealant is under constant chemical attack from the same corrosive load that pits aluminum frames. Once moisture is inside, the window’s insulating value drops and the only fix is replacing the IGU. No amount of surface cleaning touches it. We stock IGUs for the brand lines we install and can usually have the unit swapped without replacing the entire frame.
We use marine-grade flashing tape and mechanically fastened head flashing on every opening, not the adhesive-only strips that peel in humid coastal air. Sealants are specified for the substrate and the environment – butyl-based backer rod with high-quality polyurethane sealant at the exterior face – and we tool every joint so water can’t sit in a ledge or seam. In Palm Beach Shores, a bad flashing detail doesn’t show up as a drip; it shows up as hidden frame rot and sheathing damage two or three years on. We make the detail right the first time.
The price gap for a standard-size opening runs about $250-$450 between a coastal-spec unit with stainless hardware and marine-grade frame coating and an inland-spec unit with standard hardware and cheaper frame finish. On a whole-house job with ten openings, that’s a few thousand dollars. But the inland-spec window will show frame pitting and hardware corrosion within five to seven years in Palm Beach Shores salt air, and replacing an entire failed window costs $1,150-$2,600 per opening. The cheap spec costs more within a decade – often double. We quote both specs side by side so you see exactly what the money buys. Call (386) 251-6745 for a written comparison on your home’s openings.
Get an Honest Quote for Your Palm Beach Shores Home
You’ve lived on Singer Island long enough to know the salt air doesn’t negotiate and the insurance adjuster doesn’t care about the bargain. The windows and doors on your home either hold in a storm or they don’t. We’re a second-generation glazier’s shop run by Dale Kessler, and we’ve spent years doing this work right – which means spec’ing every opening in Palm Beach Shores for the environment it actually sits in. Both manufacturer warranty layers registered in writing before the truck leaves your driveway. A Done Right Promise that means what it says. A live person answers the phone, day or night. Call (386) 251-6745 to schedule your free estimate. We’ll measure every opening twice, put the numbers on paper, and give you a quote that doesn’t change once the work starts.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores and surrounding Palm Beach County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After