Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Westgate
Window installation in Westgate is rarely a simple swap. It’s a full frame-out on a concrete block home built when Eisenhower was in office, with jalousie louvers that rattle in every afternoon storm and aluminum frames corroding from salt-laden humidity. At TruePane Windows & Doors, we’ve done enough of these jobs to know exactly what’s behind those walls before we open them up. Dale Kessler founded this company on a rule that governs every install we do in Westgate: if the pane is not true, the job is not done. Call (386) 251-6745 and a live person answers, day or night.
Key Takeaways
- Most Westgate homes built before 1970 need full frame-out replacement, not insert jobs, because of CBS construction.
- Original jalousie and single-pane aluminum windows routinely fail Palm Beach County’s 140-150 mph wind-load code, and that failure drives insurance non-renewals.
- Impact-rated replacements with masonry anchoring are the difference between a renewed policy and a canceled one.
- We register both manufacturer warranty layers in writing before the truck leaves your driveway.
Why TruePane Windows & Doors Is Westgate’s Preferred Window Installation Company
We work in Westgate regularly, and our crews know what a 1950s CBS house on a tight lot actually looks like inside the wall cavity. Window Installation here is not a volume business for us. It’s a craft commitment. Our technicians are background-checked, uniformed, and they measure every opening twice before a single fastener goes in.
What Westgate homeowners tell us matters most is that we show up when we say we will, give a square deal on the quote, and stand behind the work. The Done Right Promise puts that in writing. If something isn’t right, we make it right. No paperwork fights. No arguing. That’s the standard Dale Kessler set, and it’s the one our Westgate customers hold us to.
Our Window Installation Services in Westgate
We install, replace, and service every window type a Westgate homeowner is likely to need. Here are the four we specify most often for this area’s housing stock and climate.
Casement Windows
Casement windows are the workhorse for Westgate’s older CBS homes. They seal tight against wind-driven rain, which matters when afternoon convective storms roll through Palm Beach County on a near-daily basis in summer. Fusion-welded corners on impact-rated casements hold up against the 140-150 mph design wind speeds the Florida Building Code requires, and the single-lever operation means no rattling louvers and no drafts. A typical impact-rated casement replacement in Westgate runs $800-$1,600 per opening, depending on size and frame condition.
Awning Windows
Awning windows make sense for Westgate homes where ventilation matters but so does water management. They hinge at the top and shed rain naturally, which is exactly what you want during a humid season that runs nine months of the year. We commonly install them in bathrooms, kitchens, and above fixed picture windows on single-story CBS homes, especially where the original jalousie or single-pane aluminum unit has rusted at the corners. Prices typically run $650-$1,200 per opening for impact-rated awning units in this area.
Fixed & Picture Windows
A fixed or picture window is often the right call for a living room wall facing the street, where you want light without operable hardware that can fail. For Westgate’s modest post-war homes, a large fixed window with low-E argon-filled glass changes the thermal performance of the entire room. But the install method matters. On CBS construction, a frame-out replacement with masonry anchors and flashing tape at every jamb is non-negotiable. Expect $900-$2,400 for a large impact-rated picture window in Westgate, with custom sizes at the higher end.
Single & Double Hung
Single and double hung windows are the default replacement for older aluminum sliders in Westgate bedrooms and living rooms. They offer better sealing than a sliding track, and with impact-rated laminated glass they meet Palm Beach County’s wind code without needing shutters or panels. We measure every opening twice and quote side by side on paper so you see exactly what you’re buying. Typical double hung replacements in Westgate run $700-$1,400 per opening for standard sizes, more for custom or oversized units.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, and ES Windows. We don’t push one brand. We quote side by side on paper so you can compare frame construction, glass packages, and warranty terms line by line. For Westgate’s climate, we frequently specify PGT’s impact-rated lines for their Miami-Dade certification and ES Windows when a homeowner wants a European-style frame with a narrower sightline. Whichever line you choose, both warranty layers get registered in writing before we leave the driveway.
Common Window Installation Problems We See in Westgate Homes
- Dried and cracked rubber gaskets on 50-year-old jalousies. The original gaskets on Westgate’s jalousie windows have been baking in humidity and UV for half a century. When they fail, wind-driven rain blows through the louvers and into the wall cavity, and the homeowner doesn’t know until drywall starts staining or mold shows up.
- Corroded aluminum frames losing their seal. Salt-laden humidity is hard on aluminum. Corner joints corrode, the frame flexes, and the seal thins until humid air condenses between the panes. If your window is permanently fogged, the insulated glass unit has failed. That’s a replacement, not a repair.
- Insert replacements without proper flashing. We see insert jobs in Westgate where the installer skipped flashing tape. After one wet season, afternoon convective storms have driven water behind the frame and into the interior drywall. The fix is a full frame-out with proper flashing, which is what we do from the start.
- Windows that don’t meet wind-mitigation inspection standards. A window can look fine and still fail a wind-mitigation report. If the frame isn’t anchored to the CBS wall correctly or the glass lacks the proper impact rating, the insurance credit doesn’t come through and the policy stays in limbo. We document everything the inspector needs.
Why Salt Air Near Westgate Decides Your Window Materials
Westgate sits close enough to the Atlantic that salt-laden humidity is a constant presence, even when you’re not on the water. That changes what we specify. Uncoated aluminum frames corrode faster here than they do ten miles inland. Standard steel hardware on operable windows rusts and binds. Cheap vinyl frames with thin wall thicknesses warp under the repeated heating and cooling that comes with a Palm Beach County afternoon sun. We specify stainless or hot-dip galvanized hardware, marine-grade finishes, and frames from manufacturers who build for coastal conditions as a default, not an upgrade. The price gap between a coastal-spec window and an inland-spec window is real, usually 15 to 25 percent per opening. But the cheap spec costs more within a decade, because you’ll be replacing corroded hardware, fighting fogged glass, and eventually pulling the whole unit and starting over. Buy once. That’s the square deal.
Pricing for Window Installation in Westgate, FL
Window installation in Westgate runs a wide but predictable range. Expect $650-$1,600 per opening for most impact-rated casement, awning, and double hung replacements on standard-size CBS openings. Fixed and picture windows run $900-$2,400 depending on glass package and size. Bay and bow windows start around $2,800 and go up from there, since they nearly always require structural work on a concrete block wall. What moves the number is frame condition, opening size, glass package, and whether we need to core-drill for masonry anchors or work around existing interior trim you want to keep. We give you a written line-item quote before any work starts, and the price on the quote is the price on the bill. Call (386) 251-6745 to schedule your free estimate. We’ll walk the openings with you and tell you exactly what you’re looking at.
We Also Serve Cities Near Westgate
TruePane crews work throughout this part of Palm Beach County. If you’re in Royal Palm Beach, Loxahatchee Groves, Westlake, or Palm Springs, we handle window installation and replacement there too and bring the same coastal-spec standards. Same Done Right Promise. Same live person on the phone 24/7. Call us at (386) 251-6745 and tell us which city you’re in.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Westgate
Yes, and in most cases it’s the deciding factor. Impact-rated windows that meet Palm Beach County’s 140-150 mph wind-load requirements are exactly what wind-mitigation inspectors look for. On a 1950s concrete block home near Westgate’s older residential core, we pulled the original jalousies and found the rubber gaskets so deteriorated the louvers rattled in every storm. A full frame-out replacement with fusion-welded impact-rated casements, masonry anchors into the CBS walls, and flashing tape at every jamb moved that homeowner’s policy from non-renewal notice to renewed. Call (386) 251-6745 and we’ll walk your openings with you before you spend a dollar.
Because the original frames in most Westgate homes are corroded, out of square, and not anchored to meet current wind code. An insert replacement leaves the old frame in place, which means you keep whatever structural weakness and water intrusion path already exists. On CBS construction, the right method is a full frame-out with masonry anchors and flashing tape. It’s more work up front, but it’s the difference between a window that passes a wind-mitigation inspection and one that doesn’t.
Single-pane aluminum conducts heat and cold straight through the frame and glass. In Westgate’s humidity, that means condensation on the inside of the glass, higher cooling bills, and corrosion on the aluminum itself. Low-E argon-filled windows reflect radiant heat before it enters the room, and the gas fill slows conductive heat transfer. In practical terms, a low-E impact-rated double hung in Westgate will run you about $700-$1,400 per opening, and it will outperform the 1965 original every month of the year. The difference shows up on your FPL bill and in how the room feels by the window in August.
Look for permanent fog between the panes that won’t wipe off from either side, water beading inside the glass, or a film that appears when the afternoon sun hits the window. That’s moisture inside the insulated glass unit, which means the seal has failed and the low-E coating is compromised. In Westgate’s humidity, seal failure also often shows up as corrosion at the frame corners or a white powdery residue where the aluminum meets the glass. If you see any of that, the unit needs replacement. Call (386) 251-6745 and we’ll tell you over the phone whether it’s worth an in-person look.
Yes. On Westgate’s concrete block homes, impact-rated windows must be anchored with masonry fasteners, not wood screws. Flashing tape at every jamb is required to keep wind-driven rain out of the wall cavity, and the corners need to be sealed correctly or water will find its way in during the first wet season. We specify these methods on every install because we’ve seen what happens when someone skips them. It’s not an upgrade. It’s the only way to do the job right in this climate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate with a second-generation glazier’s standard since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.