Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom & Geometric Windows for Royal Palm Beach Homeowners
Custom and geometric windows in Royal Palm Beach run anywhere from $1,800 to $6,500 per opening installed, depending on the shape, glass package, and whether the unit is impact rated. A simple trapezoid or triangle fixed window sits at the lower end, while a large radius arch or oversized impact unit with laminated glass lands at the top. Most custom window projects in Royal Palm Beach take three to six weeks from template to install, and the work is done by a company that has been setting glass in South Florida since 2008.
TruePane Windows & Doors was founded in 2008 by Dale Kessler, a second-generation glazier who still keeps one rule on the whiteboard: if the pane is not true, the job is not done. We build and install custom windows for homes across Royal Palm Beach, from eyebrow arches over entry doors to full walls of trapezoid impact glass in lakeside properties. Every opening gets measured twice, quoted on paper side by side against manufacturer lines, and backed by our Done Right Promise. A live person answers our phone 24 hours a day at (386) 251-6745.
What Our Custom & Geometric Windows Service Includes
Custom windows are not a catalog item. They are built to a specific opening, a specific roofline, and a specific set of wind-load requirements. Here is what we handle in Royal Palm Beach, and how we approach each one.
Custom Impact Windows
Royal Palm Beach sits in a high-velocity hurricane zone, which means any custom-shaped window must also meet Miami-Dade or Florida Building Code impact standards when it is in a protected opening. A custom impact window pairs a shaped frame with laminated glass that holds together under impact and keeps wind and water out of the house. TruePane installs custom impact windows from PGT and CGI with the correct structural mullions and anchoring so the shape holds under load. Both warranty layers are registered in writing before our truck leaves your driveway.
Geometric & Shaped Windows
Geometric windows include trapezoids, triangles, pentagons, octagons, parallelograms, and clipped-corner rectangles. They typically sit above or beside standard windows to fill the leftover space created by roof pitches, stairwells, or architectural detailing. We template every opening physically, not from the original blueprint, because framing shifts over twenty or thirty years and a window cut to the original plans may not fit the house as it stands today. Then we order the unit with the correct sightlines and low-E glass for the orientation of that wall.
Arched & Curved Windows
Arched windows include radius tops, half-rounds, quarter-rounds, eyebrows, and gothic arches. The curve has to be a true radius, not a faceted approximation, or the unit looks wrong from the street and leaks at the frame joints. TruePane measures the radius at three points along the arc and orders the bent frame and curved glass to that exact profile. We also check the rough opening for out-of-square conditions that are common in older Royal Palm Beach homes and correct them before the unit goes in.
Oversized Openings
Oversized custom windows span wide openings, often in great rooms, stair landings, or atriums, and require structural headers and mullion reinforcement that standard windows do not. The glass carries more wind load, so the laminated interlayer and frame engineering matter more. TruePane quotes these openings with the correct structural package, including reinforced mullions and impact-rated glass when required, and we pull the permit so the work passes inspection. We do not guess at the engineering on a wide span.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom & Geometric Windows
We are an authorized installer for PGT and CGI, both Florida-based manufacturers that build impact-rated windows specifically for our wind zone. PGT’s custom division handles trapezoids, triangles, and radius shapes in their impact lines, and we quote their units with the correct glass packages for east- and west-facing walls. CGI builds heavy-duty impact windows that hold up well on oversized openings and shoreline-adjacent properties in the Royal Palm Beach area. When we quote PGT or CGI, we sit down with you and show the line items side by side on paper so you see exactly what you are paying for.
We also service and replace custom units from Therma-Tru, whose entry and door window inserts appear in many Royal Palm Beach homes. Whether you have a Therma-Tru door with a custom arch insert or an older custom unit from a builder line, we can measure, order, and install the replacement. If we cannot match the exact profile, we tell you before taking the job, not after the old window is out. And if you have any other make, we can still help.
Signs You Need Custom & Geometric Windows Right Now
- Condensation between the glass panes. This means the seal has failed and the insulating gas has escaped. The window cannot be fixed by cleaning it; the glass unit needs replacement. In a custom shape, that means a new made-to-measure insulated glass unit rather than an off-the-shelf replacement.
- Visible frame rot or soft wood around the opening. South Florida humidity and storm-driven rain work their way into any gap between the frame and the rough opening. Soft wood means water has been getting in for a while. If the frame is compromised, the window has to come out, the opening has to be repaired, and the new unit has to be flashed correctly before it goes back in.
- Difficulty opening or closing a custom window. A shaped window that binds or sticks is usually out of square or the frame has shifted. Forcing it puts stress on the glass and the seals. We realign or replace the unit and correct the rough opening rather than forcing the window to work against the house.
- Drafts or heat gain around a fixed geometric window. Fixed windows should not leak air. If you feel heat or cold near the frame, the flashing or the seal has failed, and the window is costing you money in energy. In Royal Palm Beach, the afternoon sun on an unshaded west-facing window will find every gap.
- Water stains on drywall below or around a shaped window. Water intrusion shows up as brown stains or peeling paint. By the time the stain is visible, the leak has been active for a while. A custom window that leaks needs more than caulk; it needs the flashing system rebuilt and the unit rebedded.
Our Custom & Geometric Windows Process - Step by Step
- 1
Measure and template. We come to your home, inspect the rough opening, and template the exact shape with physical measurements taken at multiple points. For arched units, we record the radius three ways so the curve comes back true. This is the step most installers rush, and it is the step that determines whether the window fits the first time.
- 2
Quote on paper, side by side. We write the quote with the manufacturer line, the glass package, the frame finish, and the warranty durations listed separately. If we quote PGT alongside CGI, you see both columns and you decide which tradeoff fits your house and your budget. The price we quote is the price on the bill.
- 3
Permit and order. We pull the permit for the work in Royal Palm Beach and order the custom unit from the manufacturer. Lead times run three to six weeks for most custom shapes, and we tell you the date range up front. We do not order the glass until the deposit clears and the measurements are confirmed.
- 4
Installation. Our background-checked, uniformed technicians remove the old window, repair any hidden damage to the rough opening, flash the new opening correctly, and set the unit level and square. We work the way we would in our own mother’s house, which means drop cloths, cleanup, and no shortcuts on the flashing.
- 5
Warranty registration and walkthrough. Before we leave, we register both manufacturer warranty layers in writing with durations stated, and we walk you through what was installed and how to care for it. Then our Done Right Promise covers the workmanship: if it is not done right, we make it right, no paperwork fights and no arguing.
How Much Does Custom & Geometric Windows Cost in Royal Palm Beach?
A typical fixed triangle or trapezoid window in Royal Palm Beach runs $1,800 to $3,500 installed. A radius arch or eyebrow window runs $2,500 to $5,000 depending on the arc and width. A large oversized opening with impact-rated laminated glass and reinforced mullions runs $4,000 to $6,500 or more, and an operable geometric window, which carries more hardware and sealing, sits at the upper end of each range.
| Custom Window Type | Typical Installed Cost in Royal Palm Beach |
|---|---|
| Fixed triangle or trapezoid | $1,800 – $3,500 |
| Radius arch or eyebrow (fixed) | $2,500 – $5,000 |
| Oversized opening with impact glass | $4,000 – $6,500+ |
| Custom impact window (any shape) | $2,800 – $6,000 |
What drives the price: the glass package, whether the unit is impact rated, the frame material, the size of the opening, and whether structural work is needed around the rough opening. The cheapest bid on a custom window usually comes from a contractor who is templating from old plans, skipping the permit, or using a thinner glass package. You avoid overpaying by getting a written line-item quote that separates the window cost from the labor, the flashing, and the permit. Our estimates are free, and the quote we give you is fixed; no change orders appear after the job starts. Call (386) 251-6745 to schedule yours.
Custom & Geometric Windows Near Royal Palm Beach - Our Service Area
TruePane Windows & Doors serves Royal Palm Beach and the surrounding communities, including Custom & Geometric Windows in Loxahatchee Groves, Custom & Geometric Windows in Westlake, Westgate, Palm Springs, Wellington, West Palm Beach, Greenacres, Atlantis, Palm Beach Gardens, Riviera Beach, and Lake Park. Most custom window projects in Royal Palm Beach are measured within the week, and we schedule installs to work around your timeline. We set a date, we show up on that date, and a live person answers our phone around the clock. If you are in a neighboring community and need a custom window, the same crew and the same standard apply. Learn more about our home services and the full range of work we do across the region.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Royal Palm Beach
A custom window is built to a specific shape, size, or opening rather than pulled from a standard catalog. Geometric windows include triangles, trapezoids, pentagons, octagons, and clipped-corner shapes, while arched windows include half-rounds, quarter-rounds, eyebrows, and radius tops. In Royal Palm Beach, these windows usually fill openings created by roof lines, stairwells, and architectural detailing. TruePane templates every opening physically and orders the unit to the exact measurements and angles required.
Most custom window projects in Royal Palm Beach take three to six weeks from measurement to installation. The manufacturer lead time is the main variable, and impact-rated glass adds time to the order. We give you the date range up front and do not order the glass until measurements are confirmed. The installation itself is typically completed in a single visit.
A fixed triangle or trapezoid window runs $1,800 to $3,500 installed, a radius arch runs $2,500 to $5,000, and oversized impact openings run $4,000 to $6,500 or more. The price depends on the shape, glass package, frame material, and whether structural work is needed around the opening. Call (386) 251-6745 for an exact quote on your opening; estimates are free.
Yes. TruePane is an authorized installer for PGT and CGI, and we quote both lines side by side on paper so you see exactly what you are buying. Both manufacturers build impact-rated custom windows for the South Florida wind zone, and we register both warranty layers in writing before we leave your driveway. We also service and replace Therma-Tru door windows and custom units from other manufacturers.
If a custom window is broken or leaking and the opening is exposed, call us immediately at (386) 251-6745 and a live person will answer, day or night. We board the opening securely if needed and order the replacement unit right away. Custom shapes take longer to source than standard windows, so we start the template and order the same week. We will not leave an opening exposed to weather or security risk.
Every custom window from TruePane carries The Keystone Standard: both manufacturer warranty layers registered in writing, with durations stated, before our truck leaves the driveway. On top of that, our Done Right Promise covers the workmanship, which means if the install is not done right, we make it right, no paperwork and no arguing. We stand behind the work, in writing.
Clear the area around the window inside and out so our technicians have room to work, and move any furniture or wall hangings near the opening. If we are replacing a large oversized window, remove anything fragile from the room. We protect the floors and work areas with drop cloths and clean up before we leave. You do not need to remove the old window yourself, and you should not attempt it on a load-bearing or impact opening.
Schedule Your Custom & Geometric Windows Service in Royal Palm Beach Today
If you have a custom window that needs replacing, or an opening that needs a new shaped unit, call TruePane Windows & Doors at (386) 251-6745. We will measure, quote on paper, and do the job right the first time. Our estimates are free, and a live person answers the phone 24 hours a day, 7 days a week.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Royal Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.